Product / Equipment

OIL WATER Analyzer

(设备/材料)
型号编号: ZT100
状态: New
位置或存放国家: Russia
服务工程支持: Yes
保证: No
价钱: 要求价格
描述:
The ZT100 in-line analyzer is designed for continuous measurement of water content in oil, all types of oils and motor fuels. The analyzer consists of a capacitive element and a controller. If necessary, you can add a static mixer and a remote display. The analyzer is based on the measurement of dielectric constant. The dielectric constant of a liquid is a measure of its ability to store an electric charge, which, in turn, is associated with the molecular structure of a substance. Oil and water are characterized by fundamental differences in the form of their molecular bonds, and their dielectric constants vary greatly. When even small amounts of water are mixed with oil, the dielectric constant changes significantly, which is easily reflected as a function of water content. The sensor of the device is located in such a way that the mixture passes between the electrodes and the dielectric constant of the two phase mixture is measured by changing the capacitance. The base dielectric of non-wet oil varies as a function of density and temperature. Similarly in the case of oils and petroleum products. In practice, this means that although all sensors are factory-set, calibration to the measured oil is necessary to achieve high accuracy during installation. The analyzer is used in all industries to control the quality of oil and oil products, to control the discharge of bottom water, to reduce the accident rate and corrosion of equipment
概观:

Characteristic

- dimensions / mount: 1 inch - threaded, up to 48 inches flange

- measuring range: 0-1%, 0-5%, 0-10%, 0-25%, 0-100% (with mixer)

- accuracy: ± 0.05% - up to 5% water cut; ± 0.1% - from 5% to 10% water cut; ± 0.2% - from 10% to 25% water cut

- sensitivity: 0.01%

- response time: 1 sec.

- repeatability: 0.1%

- automatic temperature compensation

- medium temperature: 0 ... + 190 ° C

- workmanship: 316 stainless steel

- maximum pressure: 100 bar

- power: two-wire 12/24 VDC

- ambient temperature: -40 ... + 85 ° C

- explosion protection: Exib IIBT4 X

- dust and water tightness: IP 66

- outputs: 4-20 mA, HART

- the possibility of verification without removing the device (depending on the version of the device)

Options:

- spark protection barrier

- display

- static mixer

- thermal cover

LLC "MS Service"

地点: Russia Moscow
主要产品/服务: Production and supply of analytical equipment. Environmental Monitoring System MS3550
注册: Russia Moscow