Arctic Drilling rig HR 5000

Purpose: drilling of single and cluster wells
Permissible hook load: 320 metric tons
Estimated power: 1500 hp
Nominal drilling depth: up to 5000 m
Operating temperature range: from –45°C to +40°C
Certification: TR CU (Customs Union)
Drive: AC systems

Key Features:

• Vertical lifting mast (hydraulic cylinder)
• Box-on-Box type base
• Fully covered base and echelon
• Possibility of stationary, echelon or combined execution
• Adaptation to the conditions of the far north
• High installation ability and mobility

1. Mast

Manufacturer: Kenera LLC
Type: vertical-lifting
Lifting system: hydraulic cylinder
Mast height: 43.30 m
Permissible hook load: 320 t

Peculiarities:

• Lifting without a crane (using a hydraulic cylinder)
• Rigid construction for low temperature operation

Advantages:

• Quick assembly and disassembly
• Reliability under wind and temperature loads

2. Top Drive System - TD-500-XT

Manufacturer: Kenera LLC (licensed or in-house development)
Type: TD-500-XT
Load capacity: 454 t
Electric motors: 850 kW (1156 hp)
Torque: 70,580 Nm

Note: This model was already described in a previous PDF (BENTEC), but here it is integrated into the HR5000 unit with specific parameters.

Key Features:

• AC drive with frequency regulation
• High torque for challenging intervals
• Operation at low temperatures (down to –45°C)

Advantages:

• Efficient drilling with continuous rotation
• Reducing the time required for lifting and lowering operations

3. Mud pumps - F1600

Manufacturer: BOMCO / RONGSHENG / HONGHUA (optional)
Type: F1600
AC motor: 2 x 720 kW
Working pressure: 5000 psi (optional 7500 psi)

Peculiarities:

• Two pumps included
• Possibility of increasing pressure on request

Advantages:

• High well flushing performance
• Reliability for long-term operation in arctic conditions

4. Drill key - IR100

Manufacturer: Kenera LLC
Type: IR100
Drive: hydraulic
Design: on a rotating support, retractable

Peculiarities:

• Mechanized screwing/unscrewing of pipes
• Retractable design for ease of use

Advantages:

• Improving the safety and speed of lifting operations
• Reducing the physical strain on staff

5. The basis is "Box on Box"

Manufacturer: Kenera LLC
Type: Box-on-box
Drilling rig floor height: 9.50 m
Clear height to turning beams: 8 m
Maximum load on the candlestick: 227 t

Peculiarities:

• Fully covered base (protection from cold)
• High load-bearing capacity

Advantages:

• Stability during cluster drilling
• Possibility of placing air defense and other equipment

6. Rotary table - P700

Manufacturer: Uralmash NGO Holding
Type: P700
Through hole diameter: 700 mm
Permissible static load: 500 tons
Drive: electric

Peculiarities:

• Large bore for large diameter tools
• Electric drive for precise positioning

Advantages:

• Top Drive Compatibility (Duplication)
• Reliability under high loads

7. Drilling winch - JC50DB

Manufacturer: HONGHUA
Type: JC50DB
Power: 2 x 600 kW
Main brake: regenerative (engine)
Auxiliary brake: hydraulic disc
Wireline diameter: 35 mm

Peculiarities:

• Two AC motors
• Energy recovery during descent
• Hydraulic disc brake for emergency stopping

Advantages:

• Energy efficiency
• Smooth regulation of ascent/descent speed
• High security

8. Circulation system

Delivery: in accordance with customer's technical requirements
Containers: rectangular
Equipment (optional): vibrating screens, hydrocyclone units (HCU), centrifuges, degasser, sludge removal system (domestic or imported)

Peculiarities:

• Modular configuration
• Possibility of operation at sub-zero temperatures

Advantages:

• Effective cleaning of drilling mud
• Reduced wear on pumps and motors
• Compliance with environmental requirements

The unit is certified according to TR CU, adapted for temperatures down to –45°C, and can be used for both single and cluster wells.