Hardness gage Dynamic HLN-11A

(设备/材料)

型号编号: HLN-11A

状态: New

位置或存放国家: Russia

服务工程支持: Yes

保证: No

价钱: 要求价格

描述:

HLN-11A Dynamic Hardness Tester is a high-precision instrument designed to measure the hardness of metals and obtain the tensile strength of the material under study. The hardness tester is equipped with a built-in printer for the ability to quickly print the received data. HNL-11A is certified in the Russian Federation.

概观:

Distinctive features of the dynamic hardness gage HLN-11A:

A wide range of measured values for all types of metals and alloys;
Measurement of the hardness of metals and alloys according to all standardized hardness scales: Rockwell scales (B) and (C) (HRB, HRC), Vickers (HV), Brinnel (HB), Shore (HS) and Lieb (HL);
Recalculation of values on an additional scale of ultimate strength;
Ability to measure in any spatial position;
A removable printer is included in the basic package;
Six types of percussion devices are available for various applications;
Large LCD displays all functions and parameters;
Indication of the degree of discharge of the power source;
New function of software calibration of the device;
Indication of charging the power supply on the LED keyboard;
Clear error indication on the LCD.

Technical characteristics of the dynamic hardness gage HLN-11A:

Measurement scales	HL, HRC, HRB, HV, HB, HS
Strength range	374-1999 MPa
Absolute measurement error	units of HLD ± 6 (760 ± 30 HLD) errors of the measured result units of HLD 6 (760 ± 30 HLD) repeatability of the measured result
Standard percussion device	type D
Special Impact Devices	DC / D + 15 / G / C / DL
Maximum hardness of the measured part	996 Vickers units (for drum types: D / DC / D + 15 / C / DL) 646 Brinell units (for type G percussion device)
Minimum radius of curvature of the measured surface (convex / concave)	Rmin = 50 mm (when using the support ring Rmin = 10 mm)
Minimum mass of the measured detail	2 - 5 kg on a stable support 0.05 - 2 kg when using equipment
Minimum thickness of the measured part	5 mm (when using percussion devices of types D / DC / DL / D + 15) 1 mm (when using type C percussion device) 10 mm (when using an impact device type G)
Minimum thickness of hardened layers	0.8 mm
Power supply	5 Ni-MH batteries x 1.2 V 600 mA / h
Battery Charging Time	3 hours
Uptime	at least 50 hours (without printing and turning on the display backlight)
Operating temperature range	0 - 40 C
dimensions	268 x 86 x 50 mm
Relative humidity	<90%

Basic delivery:

An electronic unit with a removable printer;
Impact device type D;
Exemplary Lieb hardness measure;
Charger;
Cleaning brush;
Desktop tripod for the electronic unit;
Manual;
Warranty Card;
Case for storage and carrying.

公司简介

LLC "Techint"

地点: Russia Moscow

主要产品/服务: Non-destructive testing devices

成立年: 1984