Sofeksil-1165 is a Defoamer for Drilling fluids and Oil/Gas Separation.

Compound

Sofeksil-4248P is a polymethylsiloxane liquid applied to a solid carrier (zeolites, etc.).

Peculiarities

• It is active at low concentrations from 0.005 to 0.05%.
• Does not lose its performance properties when stored under the influence of heat and humidity.
• Free-flowing, non-sticky granules that mix easily when dry allow for precise dosing.
• Does not produce dust.
• The granular form ensures improved distribution of the defoamer in the solution volume.
• Used in a wide range of pH and temperature values.
• Water hardness does not affect the quality of washing.
• Application
• Sofeksil-4248P is used as a defoamer for drilling fluids in cases where the introduction of liquid defoamers is difficult.
• The antifoam agent Sofeksil-4248P is used in washing powders for automatic washing machines with adjustable foaming.
• The dry form of the Sofeksil-4248P antifoam agent ensures precise dosing and ease of use at low temperatures.
• Directions for use
• In dry form, Sofeksil-4248P mixes well with any bulk components of the solution.
• The recommended concentration of Sofeksil-4248P is 0.005 to 0.005% of the total volume of the solution.
• The exact dosage is determined empirically and depends on the foaming ability of the solution.
• Properties

• Indicator	Norm
  Appearance	Free-flowing white granules
  Bulk density, g/ dm3	720 - 760
  Granulometric composition
  Average particle size, mm	0.500
  Particle size distribution, % granules:
  More than 1.4 mm	5.0
  More than 1.0 mm	25.0
  More than 0.150 mm	13.0