Pump KMN 80-65-165 (7.5Kw)

Application areas:

• chemical and petrochemical industry,
• oil refining industry,
• energy,
• fuel storage facilities.

Pumped liquids:

• light petroleum products (gasoline, diesel fuel, kerosene, etc.),
• industrial alcohols,
• pumping of organic synthesis, in particular pyrolysis resin,
• liquids containing solid inclusions in an amount of no more than 0.01% by weight, with a particle size of no more than 0.2 mm and a kinematic viscosity of liquids of no more than 20 cSt. Density 0.71 ÷ 1.0 g/cm3, temperature from – 30°C to +90°C.

Construction type:

• centrifugal, horizontal, cantilever, monoblock, single-stage,
• The hydraulic axial force unloading system reduces the axial load on the electric motor bearings, significantly increasing the service life of the pump.
• the flow part of KMN pumps is made of corrosion-resistant aluminum alloy,
• equipped with an explosion-proof electric motor,
• permissible cavitation reserve, no more than 4.5 m.,
• climatic performance type U2,
• mechanical seal - single, with additional cuffs,
• It is possible to manufacture pumps according to individual customer requirements (flow rate, pressure, climatic performance, sensor mounting locations, frame, etc.),
• The pump is powered by three-phase alternating current, with a voltage of 380 V.

18 months warranty.

The products are certified in accordance with:
TR CU 012/2011 "On the safety of equipment for work in explosive environments".

The products are declared in accordance with:
TR CU 010/2011 "On the safety of machinery and equipment".