Add product
Product / Equipment

Elevators

(Equipment / Material)
Model Number: 16350–80
Condition: New
Location or Storage Country: Russia
Location: Russia / Krasnodar Territory / Krasnodar
Service Engineering Support: Yes
Warranty: No
Price: Call for price
Description:
Designed for gripping and holding on weight drill string or casing with a straight saddle, with a diameter of 60 to 426 mm., During hoisting operations while drilling oil and gas wells, in moderate and cold macroclimatic areas (area I 2) according to GOST 16350– 80.
Overview:

DESCRIPTION OF THE DESIGN

The main parts of the elevator are the body 1 and the sash 3, made of steel forgings (Figure 1).

On the left side of the housing there is a latch 11 that holds the sash in the closed position. The handle 10 is pivotally mounted on the sash, when lowering and turning it “towards you”, the latch and the sash of the elevators open.

In the upper part of the elevator housing there is a bore under the pipe coupling, which eliminates the possibility of the pipe coming out of the elevator in case of a loose closure of the sash. Fuse slings 6 installed in the eyes of the elevator, provide free entry of the slings into the eyes and prevent them from falling out during operation. To withdraw the slings from the eyes, the safety locks of the slings are rotated around the axis.

Elevator type KM: 1 - body; 2 - spring lock, 3 - sash; 4 - handle spring, 5 - sling fuse spring, 6 - sling fuse; 7 - the axis of the safety slings; 8 - axis of the leaf; 9 - axis of the handle; 10 - handle; 11 - latch; 12 - axis of the latch.

To see product company information you need to be logged in.