Explosion-proof low-Current Control button AL-BT-S02 (MAL-BT)

The product is intended for use in indoor and outdoor installations of hazardous gas hazardous areas of classes 1 and 2 in accordance with the requirements of GOST IEC 60079-14-2011, industry Safety Rules, and also in accordance with special conditions for safe use (X mark in the explosion protection marking).
The product is intended for use in security systems of objects as a button for manual control of executive locking devices.
The product has the type of explosion protection “s” “special” in accordance with GOST 22782.3-77 and meets the design requirements in accordance with GOST R IEC 60079-0-2011.
The product has an explosion protection mark 1Ex s IIC T5 Gb X.
According to the degree of protection of the shell from the ingress of external solids and water, the product meets the IP54 class according to GOST 14254-96.
The product can be operated at temperatures from minus 40 to 60 ° C (UHL3.1 version according to GOST 15150-69).
According to the method of protection against electric shock, the product complies with class III of GOST 12.2.007.0-75.
The product is made with a permanently attached cable. The base cable length is 1m. By agreement, it is possible to manufacture with a cable of a different length, but not more than 30 m.
It is recommended to be used together with AL-DV-01 and PKv-6-1 / 2.

Record when ordering:
AL-BT-S02- X
where X is the cable output option:

- R is radial,
- A - axial (for concealed cable routing)

Specifications