Valve series HP60 RA and HP60 DA
(Equipment / Material)
Model Number: HP60 RA
Condition: New
Made in: Russia
Location or Storage Country: Russia
Location: Russia Moscow
Service Engineering Support: Yes
Warranty: No
Price: Call for price
Description:
The HP 60 Series is available in ANSI 600, single-seated cast body, anti-cavitation cages and balancing or contoured pistons designed to handle the most challenging media. In the cage version, the fluid is controlled by a special multi-hole cage that acts as a guide for the plug along the entire valve travel.
Overview:
The special plug design improves the control range by reducing minimum controlled flow and plug erosion. The occurrence of high pressure in the cell system in comparison with a contour plunger provides a higher flow rate when compressing a liquid, reduces the risk of cavitation and the effects that occur when working with liquid media.
All versions are equipped with a quick-detachable plunger pair.
Various designs:
- Micro-flow channel up to Ø 1 ”.
- Contoured unbalanced plug from Ø 1 "to Ø 2"
- Single-double-triple cage with unbalanced plunger Ø 1 "
- Single-double-triple cage with balancing plunger> Ø 1 ”.
On request, it is possible to install micro-flow plungers
The various stem box options, ribbed and extended, are specially designed to handle all types of media.
All valves can be equipped with CONFLOW pneumatic actuators.
MAIN CHARACTERISTICS:
| • Sizes from DN 25 to DN 100 Operating temperatures from - 45 ° C to + 425 ° C In special version from - 196 ° C |
• Pressure class ANSI 600 per ASME B16.34 PN 63 - PN 100 according to EN 12516-1 |
| • Connecting standards EN1092-1 PN 63 type BCDEF EN 1092-1 PN 100 type BCDEF On request: ANSI B16.5 -150 / 300 RF - RJ BW ANSI B16.25 SW up to Ø 2 " |
• Ribbed stem box is the basic version Extended type available on request for temperatures <- 75 ° C Bellows type PN100 for hazardous environments is available on request |
| • Stem seal
PTFE “V” rings up to 190 ° C (TA-Luft su ric approved) |
• Special stem seal
Clean GRAPHITE with labyrinth seal and lubricator up to 427 ° C |
| • Quick-release seat and plug from Gr. 6 | • Leakage class according to ANSI B16.104 class IV °
On request class V ° and class VI ° |
NGO Valve
Locations: Russia Moscow
Main Products/Services: High quality pipeline fittings supplier
Registration: Russia Moscow