Truck crane KS-55729-7K
(Equipment / Material)
Condition: New
Location or Storage Country: Russia
Service Engineering Support: Yes
Warranty: Yes
Price: Call for price
Overview:
Technical characteristics, general:
Parameter | Meaning |
| Overall dimensions (length x width x height), m | 11.9x2.55x3.95 |
| Base of outriggers, m: | |
| With outriggers extended | 6.0/7.415 |
| When the supports are not fully extended | 6.0/4.745 |
| With the supports retracted | 6.0/2.27 |
| Base, m | 1.95+3.69+1.32 |
| Track (rear and front axle), m | 2.05 |
| Rear clearance, m | 3.5 |
| Turning radius, m | 15.5 |
| Weight of the installation in transport position (full), t | 26.9 |
| Weight of the main assembly parts of the installation, t: | |
| Arrow | 5.0 |
| Working platform | 0.24 |
| Hydraulic pile driver | 1.13 |
| Coupling for screwing piles No. 203-219 | 0.3 |
| Coupling for screwing piles No. 275-315 | 0.4 |
| Distribution of load on the road from the installation, kN (tf): | |
| I front axle | 54.9 (5.60) |
| II front axle | 54.9 (5.60) |
| Rear bogie wheels | 161.7 (15.7) |
Technical characteristics of the installation in the "Crane" mode:
Parameter | Meaning |
| Maximum midi load capacity, t: | |
| With fully extended supports, reach up to 4.0 m | 32.0 |
| On retracted outriggers, reach up to 3.0 m | 8.0 |
| Without installation on outriggers, reach up to 4.0 m | 2.0 |
| Moving with a load on the hook, installation with the boom backwards | 3.0 |
| Midi load capacity at maximum reach, t | 12.2 |
| Maximum load moment, t×m | 128.0 |
| Maximum lifting height, m | 25.9 |
| Lifting height at maximum reach, m | 7.7 |
| Lowering depth (load up to 50% of crane load, boom 10 m): | |
| Reeving of cargo rope n = 8 (reach 3.0 m) | 8.0 |
| Reeving of cargo rope n = 6 (reach 3.0 m) | 12.0 |
| Reeving of cargo rope n =4 (reach 3.0 m) | 24.0 |
| Maximum reach, m | 23.0 |
| Minimum overhang, m | 2.5 |
Technical characteristics of the installation in the “Pile driving” and “Pile unscrewing” modes:
Parameter | Meaning |
| Maximum torque for screwing and unscrewing piles, kN×m | 85.0 |
| Maximum length of driven pile (without extension), m | 11.0 |
| Maximum boom reach with equipment when screwing/unscrewing piles, m | 20.0/10.0 |
| Maximum boom reach with equipment when unscrewing piles, m | 12.0 |
| Vertical stroke of the pin transmitting torque from the equipment to the screw pile (without moving the crane boom), mm | 535 |
| Time for mounting replacement working equipment on the boom of the base crane of the installation, min | 20.0 |
| The working area when screwing in screw piles with retracted supports (minimum support contour) in the rear plane relative to the longitudinal axis of the base crane, deg. | ±8 |
| Possibility of gripping (with replaceable working equipment mounted on the boom) sections of piles lying on the ground, lifting and moving in space | Yes |
| Possibility of operation in the "Crane" mode with removable working equipment installed | Yes |
Technical characteristics of the installation in the "Lift" mode:
Parameter | Meaning |
| Load capacity of the working platform, t | 0.25 |
| Maximum lifting height, m | 12.0 |
| Reach with working platform, m: | |
| Minimum | 6.0 |
| Maximum | 23.0 |
| Time of complete departure change, s | 60 |
| Speed of the turning mechanism (rotation frequency), maximum, rpm | 0.96 |
| Speed of the telescoping mechanism (extension-retraction) of boom sections, m/min | 12.0 |
| Time for mounting the working platform on the boom head, excluding engine start and stop, min | 20.0 |
Technical characteristics of the equipment model in the "Drilling Rig" mode:
Parameter | Meaning |
| Maximum drilling diameter, m | 1.0 |
| Maximum boom reach with equipment during drilling, m | 20.0 |
| Time for mounting attachments on the boom head of the base crane of the installation, min | 20.0 |
| Possibility of operation in the "Crane" mode with removable equipment installed | Yes |
| Maximum torque on drilling tool, kNm | 15.0 |
| Drilling depth with auger drill with diameter up to 630 mm, m | 20.0 |
| Drilling depth with auger drill with diameter up to 800 mm, m | 8.0 |
| Drilling depth with auger drill with diameter up to 1200 mm, m | 5.0 |
| Maximum drilling reach, m | 20.0 |
| Minimum drilling reach, m | 8.0 |
| Drilling tool loading force (not more than), kN | 150.0 |
Overall dimensions
JSC "Klintsovsky Truck Crane Plant"
Markets: РФ, СНГ
Locations: 243140, Bryansk region, Klintsy, Dzerzhinsky st., 10
Main Products/Services: Industrial lifting equipment