×
Mr / Ms / Mrs, First Name, Last Name
A valid email address. The address will be used for system emails and notifications.
Terms of use
Show terms

By accessing and utilizing our servers, services, websites, or any associated content/postings, you agree (individually and on behalf of a business if applicable) to our Terms of Use (below), which we may update anytime at our discretion. If you do not agree to the Terms of Use (“Terms”), then you are not authorized to use any of our materials for either posting or viewing/search purposes.

More info

6 + 1 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
Add product
Product / Equipment

Drilling base BO-140

(Equipment / Material)
Model Number: БО-140
Condition: New
Location or Storage Country: Russia
Location: Russia Moscow
Service Engineering Support: Yes
Warranty: No
Price: Call for price
Description:
The drilling base (hereinafter referred to as the Base) is intended for use as part of a mobile drilling rig manufactured by MASHPROM OJSC. The base is intended for installation of the RUP-560 rotor with a mechanical drive, vertical installation of pipes (candles), is a working platform for the drilling crew. The base is installed on existing oil and gas wells - well pads.
Overview:

The base structure consists of a lower supporting platform, consisting of two parallel welded plates connected by two beams. Plates and transverse elements are made of profile and sheet metal.

The lower platform is connected to the upper central frame, four vertical supports, using the fingers. The supports, in turn, are interconnected using three transverse beams. Six diagonal struts are also installed, which give additional stability to the supports of the base, as well as additional rigidity of the structure during operation.
On the right and left sides of the central frame, two lateral folding platforms are installed, which are supported by lanyards. The entire working platform around the perimeter is fenced with metal shields made of thin sheet metal.
The base is made of profile and sheet metal.
The base is transported in several parts: lower platform, struts, connecting beams, shelter and central frame. In the central frame is the rotor and candlesticks. There are three approaches to the base, one from the driller and one from the side of the base.
The base is intended for operation in macroclimatic regions with a temperate and cold climate at an ambient temperature of -45 ° to + 45 ° C.
Specifications:

Overall dimensions of the drilling site:
- length - 5.715 m;
- width - 4,580 m;
- height from the ground to the level of the working platform - 5.195 m;
- height from the ground to the bottom of the rotor beams - 4.5 m.

Overall dimensions of a basic platform:
- length - 4.0 m;
- width - 3.0 m;
- height - 0.226 m.

Weight of the metal structure of the drilling base: - 14.5 t

- Plate of the lower platform (right);

Maximum static load:
- on the rotor - 1226 kN (125 tf);
- on a candlestick, no more - 785 kN (80 tf).

Metalwork materials:
- in accordance with the specification of the project 12503.01 according to the standards of the Russian Federation.
- Plate of the lower platform (left);

Welding and welding procedures are carried out under the supervision of Rostekhnadzor and according to agreed technologies.

Product Coating

- Connecting beams of the lower platform;

Made in accordance with ISO 12944 - 5 with a coating thickness of 250 microns.

Completeness

- Racks;
- Drilling base;
- Braces;
- The central section with two folding platforms;
- Platforms (deck flooring);
- Shelter sections;
- gutter;
- Site (entrance);
- Stairs;
- Passport;
- Wiring diagram.

Mashprom OJSC

Total Employees: 1
Locations: Russia Moscow
Main Products/Services: Manufacturer and supplier of a wide range of blowout control equipment
Registration: Russia Moscow
Year Established: 2003