Pumps ЭЦН 5-80 with stages of two-Bearing design of the "Basic" series
(设备/材料)
型号编号: ЭЦН 5-80
状态: New
在制作: Russia
位置或存放国家: Russia
位置: Russia / Izhevsk
服务工程支持: Yes
保证: No
价钱: 要求价格
描述:
Low-adhesion ESPs provide higher operational and economic efficiency compared to pumps with metal working bodies when used in medium and, especially, in marginal stocks (up to 50 m3 / day), with the following complicating factors: high water cut (> 80%); scale deposits, asphalt-resin-paraffin deposits (ARPD), emulsions; increased viscosity of the formation fluid (over 10 cSt); high content of non-abrasive mechanical impurities (clay, etc.); high content of free gas at the pump intake, up to 55% (without additional devices).
概观:
| Supply, m 3 / day | Head, m | Power, W | Efficiency,% |
| 0 | 6.3 | 41 | 0 |
| thirty | 6.2 | 59 | 36 |
| 60 | 6.0 | 79 | 52 |
| 80 | 5.7 | 91 | 57 |
| 100 | 5.0 | 103 | 55 |
| 120 | 3.8 | 112 | 46 |
| 165 | 0 | 130 | 0 |
Note - due to the continuous improvement of the design and the requirements of contracts for the supply of equipment, changes in its technical characteristics and configuration are possible.
Technical characteristics of pumps type
XXX 5ETsN (NG) 5-80
XXX 5ETsN (NGA) 5-80
XXX 5ETsN (NGK) 5-80
XXX 5ETsN (NGKA) 5-80
on water with a density of 1000 kg / m 3 at a shaft speed of 2910 rpm
| Head, m | Number of sections, pcs. (section length, m) | Number of steps, pcs. | power, kWt | Weight, kg |
| -600 | 13) | 105 | 9.6 | 119 |
| -800 | fourteen) | 143 | 13.0 | 145 |
| -1000 | 15) | 180 | 16.4 | 170 |
| -1200 | 2 (3 + 3) | 210 | 19.1 | 210 |
| -1400 | 2 (3 + 4) | 248 | 22.6 | 236 |
| -1600 | 2 (4 + 4) | 286 | 26.0 | 262 |
| -1800 | 2 (4 + 5) | 323 | 29.4 | 287 |
| -2050 | 2 (5 + 5) | 360 | 32.8 | 312 |
| -2200 | 3 (3 + 4 + 4) | 391 | 35.6 | 353 |
| -2400 | 3 (4 + 4 + 4) | 429 | 39.0 | 378 |
| -2650 | 3 (4 + 4 + 5) | 466 | 42.4 | 404 |
| -2850 | 3 (4 + 5 + 5) | 503 | 45.8 | 429 |
| -3050 | 3 (5 + 5 + 5) | 540 | 49.1 | 454 |
Technical characteristics of pumps of gas-tight design type
XXX 5ETsN (NG3) 5-80
XXX 5ETsN (NG3A) 5-80
XXX 5ETsN (NG3K) 5-80
XXX 5ETsN (NG3KA) 5-80
on water with a density of 1000 kg / m 3 at a shaft speed of 2910 rpm
| Head, m | Number of sections, pcs. (section length, m) | Number of steps, pcs. | power, kWt | Weight, kg |
| -560 | 13) | 106 | 9.9 | 119 |
| -770 | fourteen) | 143 | 13.3 | 145 |
| -950 | 15) | 181 | 16.7 | 170 |
| -1150 | 2 (3 + 3) | 211 | 19.4 | 211 |
| -1350 | 2 (3 + 4) | 248 | 22.8 | 236 |
| -1550 | 2 (4 + 4) | 286 | 26.3 | 262 |
| -1800 | 2 (4 + 5) | 324 | 29.7 | 287 |
| -2000 | 2 (5 + 5) | 361 | 33.1 | 313 |
| -2150 | 3 (3 + 4 + 4) | 391 | 35.8 | 353 |
| -2400 | 3 (4 + 4 + 4) | 429 | 39.3 | 378 |
| -2600 | 3 (4 + 4 + 5) | 466 | 42.6 | 404 |
| -2800 | 3 (4 + 5 + 5) | 504 | 46.1 | 430 |
Note - due to the continuous improvement of the design and the requirements of contracts for the supply of equipment, changes in its technical characteristics and configuration are possible.
Izhnefteplast
地点: Russia / Izhevsk
主要产品/服务: Pumps
注册: Russia / Izhevsk