Portable Hardness tester TEMP-4
The portable TEMP-4 hardness gage is certified in GOSSTANDART of Ukraine, Belarus, Kazakhstan and is entered in the State Registers of measuring instruments of these states.
Technical characteristics of the TEMP-4 hardness gage
Scale hardness measurement ranges
Brinell, HB 95 - 460;
Rockwell, HRC 22-68;
Vickers, HV 95-950;
Shora, HSD 23 - 99,
as well as rubber (40-75 Shore)
Error of indications of the device no more, 3%
The number of measurements averaged by the device from 4 to 100
The minimum weight of the controlled product is 2kg *
Operating temperature range, ° С from -30 to 70
There is a model of the device with indicator light
The time of continuous operation of the device on 2
elements of type A-316 (1.5V each) for at least 600 hours
The roughness of the controlled surface is not more than Ra 2.5
Time to automatic shutdown - 1,5min
Overall dimensions, mm 30х65х135
The mass of the device is 0.22 kg
* - measurements are possible on parts weighing less than 2 kg, having
plane-parallel surfaces for grinding into massive
plate with grease.
Capabilities of the TEMP-4 hardness tester
The functional TEMP-4 hardness tester according to its functionality is a modified version of the TEMP-3 hardness tester and allows you to work in winter conditions (up to -20 ° C). Hardness tester TEMP-4: - hardness measurements are carried out directly in hardness numbers (HB, HRC, HV, HSD);
- the measurement results are averaged;
- the spatial position of the sensor is automatically taken into account;
- hardness scales are programmed (and if necessary adjusted) directly from the keyboard of the device;
- it is possible to measure the hardness of cast irons, non-ferrous metals, rubber, etc. by programming two additional scales HX and HX1.
The TEMP-4 portable hardness tester can be used in mechanical engineering, metallurgy, energy and other industries, as well as in repair and installation organizations.
The objects of measurements can be a wide range of industrial equipment: pressure vessels for various purposes, pipelines, rotors of turbines and generators, rolls of rolling mills, crankshafts, gears, parts and components of vehicles, rails, wheels of cars, electric and diesel locomotives, industrial semi-finished products, ( castings, forgings, sheets, pipes), etc.
Scope of delivery of a portable hardness tester
Electronic unit in a plastic case 1
Sensor with shielded cable 1
Batteries, type A-316 2
Passport (including verification procedure and initial verification) 1
Case 1
Exemplary measures of hardness MTB or MTR For a fee