Breathing valves KDS-3000 Aluminum

Certificate of Conformity TR TS 012/2011 "On the safety of equipment for work in explosive atmospheres." Explosion protection marking II Ga c IIВT6 Х.

KDS can be used both as respiratory and as safety valves. They should be installed on tanks in full - one as a breathing valve, the other as a safety valve.

The KDS valve has such advantages over analogues as ease of maintenance during inspections without the use of a special tool, the ability to change the response pressure, the ability to replace flame arresters without dismantling the valve itself.

The valve is made of aluminum . The valve design provides the technological processes of storage, transit and discharge / loading of oil and oil products, including in gas equalization systems.

MTBF of 36,000 cycles. A cycle refers to one opening and closing of a valve.

Possible delivery:

with a reflector disk, which ensures reduction of oil and oil products losses from evaporation from the tank;

with counter flange, gaskets and fasteners;

with mounting pipe;

special coloring is possible.

The valves are designed and manufactured in the UHL design of placement category 1 according to GOST 15150-69.

Valve life is 15 years. The service life of the fire fuse is 8 years.