Add product
Product / Equipment

Boring and crane Machine BKM 350 (360)

(Equipment / Material)
Model Number: БКМ 350 (360)
Condition: New
Made in: Russia
Location or Storage Country: Russia
Location: Russia / Kursk region / Shchigry
Service Engineering Support: Yes
Warranty: No
Price: Call for price
Description:
Crane-boring machines BKM-350 (360) based on GAZ 33081 are intended for regular drilling of wells with paddle drills, as well as installation of supports in them during the construction and repair of telephone and telegraph lines and power lines. They can be used in industrial and civil construction for drilling wells for pile foundations, fence posts and road signs, for planting trees and other works.
Overview:

at the request of the Customer BKM-350 (360) can be completed with a release device (RU.00.00.000). The release device is designed for the safe performance of electrical work on dilapidated wooden poles of communication lines and power lines with a voltage of 0.4 - 10 kV.
The main drilling tool type is a bladed auger drill.
BKM-350 (360) are installed on the GAZ-33081 chassis of various modifications, including those with a five-seater cab.

Has excellent cross-country ability, can work off-road and in any climatic conditions. The equipment can be installed on various vehicle modifications, including those with a five-seat cab. Additional equipment for drilling allows you to work with soils of categories I-IV with a well depth of up to 3 meters. Initially, this equipment was called BKM-302 and was intended for the GAZ-66 car.

The machine is equipped with a stationary hydraulic drive rotator, which provides a continuously variable speed of rotation of the tool from 0 to 215 rpm for borehole diameters from 250 to 800 mm. The hydraulic feed mechanism supports the feed force up to 2450 kgf, which is enough to overcome the resistance of most rocks. There is also a hydraulic winch with a lifting capacity of up to 2000 kgf and a hook lifting height of up to 6.5 m.

VENDOR CODE BKM-350 (360)
Maximum drilling depth, m 3
Drilling diameter, mm 250, 360, 500, 630, 800
Main drilling tool type screw auger
The angle of inclination of the mast in the longitudinal direction, degrees 60-105
Rotator stationary, hydraulic
Maximum torque, Nm (kgf * m) 5800 (580)
Drilling tool rotation frequency, rpm 0 ... 215
Drill Rod Feeder hydraulic
maximum feed force kN (kgf):
- down 24.5 (2,450)
- up 32 (3200)
Winch hydraulic drive
Max. lifting capacity of the winch, kN (kgf) 20 (2000)
Maximum hook lifting height, m 6.5
Average drilling time for wells d = 360-630 mm, min fifteen
overall dimensions in transport position, mm:
- BKM-350 (360) length / width / height 7000/2340/4000 (3900)

LLC "Geomash-Center"

Locations: Russia Moscow
Main Products/Services: Production of drilling equipment
Registration: Russia / Shchigry
Year Established: 1885