Add product
Product / Equipment

Dynamic Laminar pump ONL

(Equipment / Material)
Condition: New
Made in: Russia
Location or Storage Country: Russia
Location: Russia Moscow
Service Engineering Support: Yes
Warranty: No
Price: Call for price
Description:
For pumping viscous food, chemical or foaming liquids containing particles up to 60 mm
Overview:

Pump advantages:

  • pumping liquids with a viscosity of up to 300,000 cSt, where centrifugal pumps cannot be used;
  • for liquids containing suspensions, fibers and other soft and hard inclusions;
  • gentle pumping of foaming liquids. Special design with smooth blades;
  • non-damaging pumping of liquids with particles sensitive to mixing, crushing or delamination;
  • pumping carbonated liquids.
  • the flow path of the pump is made of stainless steel AISI 304 or AISI 316;
  • the use of mechanical seals by John Crane (England);
  • lack of flow pulsations;
  • increased abrasion resistance;
  • obtaining the required parameters of supply and pressure, low-pressure options;
  • TR CU 010 and 012 certificate;
  • work with vacuum at the inlet up to -0.85 atm;
  • double mechanical seal for dry running protection;
  • Pumps replace screw, gear, peristaltic, piston, requiring frequent repairs when pumping liquids with a large amount of solid (up to 60% by weight) abrasive, very viscous or with gas inclusions. They are used for pumping sludge (including oil and acid), sludge and lime sediments, foaming liquids. Pumping thick sediments reduces the size of irrigated fields. Unlike analogs, ONL pumps are extremely simple, structurally little different from centrifugal pumps. During repairs, only the mechanical seals are replaced.

Engine:

General industrial or explosion-proof Ex version;
Rotational speed 3000 rpm, 1500 rpm, 1000 rpm, 750 rpm;
Single-phase 220V or three-phase 220 / 380V;
Protection degree IP54, IP55;
Complete with stainless steel casing, bearing temperature sensors;
Climatic modification and category of placement U1, UHL1, U2, U3, OM2;
Hydraulic motor drive

Flow part material:

Pump casing, impeller, casing cover, lantern, shaft extension, wheel nut from 12X18H10T stainless steel.

Pump configuration options:

The impeller is standard or special for gentle pumping.
Cooling, heating chamber, electric heating.
Installation on a cart with a starter. Frequency converter.
Dry run protection. Long-term operation of the pump without the pumped liquid.
Threaded or flanged branch pipes, execution for other bore sections.
Execution for hot liquids up to 250⁰С.
Work with vacuum at the inlet up to -0.85 atm.

Industry area

Food, Agriculture, Pharmaceutical, Mining, Oil, Pulp and Paper, Energy, Chemical, Oil, Bakery / Confectionery, Soft Drinks, Dairy, Dairy / Cold Storage, Meat Processing, Farms / Poultry, Pasta, Pasta, breweries, distilleries and lvz, sugar factories, production of juices / canned food, water utilities, housing and communal services / uk / zhek / tszh, institutes / sanatoriums, boiler houses

Types of liquids

milk, beer, wine, mashed potatoes, jam, sour cream, yogurt, jelly, stillage, margarine, jam, paper pulp, fuel oil, effluents, foaming agent, mayonnaise, melange, minced meat, treacle, mustard, ketchup, yeast, cream, shampoo, gel , glue, paraffin, broth, condensate, kvass, car shampoo, balsam, biomass, bitumen, bischofite, mash, wine materials, water with inclusions, glaze, glycerin, primer, liquid glass, fat, fatty acids, sourdough, beer mash, grain cheese, caramel, cataphoresis, kefir, jelly, nitric acid, krilic acid, citric acid, formic acid, orthophosphoric acid, sulfuric acid, hydrochloric acid, sulfamic acid, acetic acid, phosphoric acid, coagulant, color, mixed feed, kvass wort concentrate , paint, blood, culture liquid, latex, liqueur, lithol, marinade, waste oil, asthite oil, technical oil, grape pulp, molasses, miscella, seaweed, washing solution, liquid soap, tinctures, oil products, oil sludge, oil, oleum , from slaughter passages, pav, pectin, pesticides, brewer grains, beer wort, processed cheese, plastisol, plasticizer, surfactants, jam, potash, pulp, fruit puree, saline solution, reagents, ahar syrup, cream, a mixture of grain with water , polyester resin, tomato juice, solid oil, sauce, soy sauce, tomato sauce, industrial effluents, luminium sulfate, ammonium sulfate, copper sulfate, sodium sulfate, sodium sulfide, kvass wort, willow wort, whey, cottage cheese, heat carrier, thermal oil, dough liquid, tomato paste, fuel additives, fuel additives, brine, liquid fertilizer, stillage filtrate, flocculant, flotation sludge, centrate, chemical additives, chemical additives, refrigerant, coolant, aspic, drilling sludge, chocolate, chocolate assa, electrolyte, paraffin emulsion, ethanol, ethylene glycol, vegetable oil, sugar syrup, beer wort, fuel additives, seaweed, chocolate mass

Manufacturer: Pumps and seals (Russia)

Construction type: laminar pumps

Impeller design: Disc impeller pumps

Number of impellers: Single-stage pumps

Submersible: Surface Non-Self-Priming Pumps

Rotation Axis Location: Horizontal

Flow rate: 0.1 ... 200 m3 / h

Head: 5 ... 90 meters

Liquid temperature: -15 ° С ... + 180 ° С (version -60 ° С to +240 ° С)

Density: Up to 1.8 g / cm3

Viscosity: up to 300,000 cSt

Inclusions: sand, abrasive, up to 60 mm

Max. pressure in the case: Up to 10 kgf / cm2

Pumps and seals

Locations: Russia Moscow
Main Products/Services: Pumps and mechanical seals
Registration: Russia Moscow