Overhead Travelling crane KEO, Electric Support single-girder

Electric single-girder overhead travelling crane with a lifting capacity of 1.0; 2.0; 3.2; 5.0 tons. TU3157-045-00211292-2010 The cranes are designed for lifting and moving loads during repair, installation, construction and other works indoors and outdoors under a canopy at an ambient temperature from -40° to +40°C. The crane travel drives are equipped with motors with a built-in electromagnetic brake. At the customer’s request, it is possible to install a frequency converter on the bridge travel drive, which will ensure smooth starting characteristics of this crane, and radio control of the crane. In the standard version, the crane is equipped with a hoist with a hook; depending on the nature of the work, it can also be equipped with additional attachments - a grab, a magnet. There is a Certificate of Conformity. Operating mode - 3K GOST 25546-82 Power current - three-phase. Voltage 380 V, frequency 50 Hz. Current lead - cable. Crane runway: rail P24 GOST 6368-82, square 50 GOST 2591-2006, P43 GOST 7173-54 Overhead travelling crane KEO, electric support single-girder Overhead travelling crane, electric single-girder support, lifting capacity of 5.0 and 10.0 tons. TU 3157-045-00211292-2010 Cranes are designed for lifting and moving loads during repair, installation, construction and other works indoors and in open areas under a canopy. The frequency converter used on the crane ensures smooth start, stop and regulation of the bridge speed. The crane bridge travel drives are equipped with motors with a built-in electromagnetic brake. An electric hoist is used to lift the load. At the customer's request, this crane can be manufactured with radio control. In the standard version, the crane is equipped with a hoist with a hook, depending on the nature of the work, it can also be equipped with additional attachments - a grab, a magnet. Operating mode - 3K GOST 25546-82 Power current - three-phase. Voltage 380 volts, frequency 50 Hz. Current lead - cable. Crane runway: For a crane with a lifting capacity of 5 t - rail P24 GOST 7173-54, square 50 GOST 2591-2006, for a crane with a lifting capacity of 10 t - rail P43 GOST 7173-54, square 60 GOST 2591-2006. Single-girder electric overhead travelling crane with a lifting capacity of 10.0 tons. TU 3157-045-00211292-2010 Cranes are designed to lift and move loads during repair, installation, construction and other work indoors and outdoors under a canopy. The frequency converter used on the crane ensures smooth start, stop and regulation of the bridge travel speed. The crane bridge travel drives are equipped with motors with a built-in electromagnetic brake. An electric hoist is used to lift the load. At the customer's request, this crane can be manufactured with radio control. In the standard version, the crane is equipped with a hoist with a hook, depending on the nature of the work, it can also be equipped with additional attachments - a grab, a magnet. Operating mode - 3K GOST 25546-82 Power current - three-phase. Voltage 380 volts, frequency 50 Hz. Current lead - cable. Crane runway: rail P43 GOST 7173-54, square 60 GOST 2591-2006. Electric overhead travelling crane, single-girder, support, with a capacity of 13.0 16.0 tons VBI. TU 3157-045-00211292-2010 The cranes are designed for lifting and moving loads during repair, installation, construction and other works indoors. The frequency converter used on the crane ensures a smooth start, stop and regulation of the bridge travel speed. The crane bridge travel drives are equipped with motors with a built-in electromagnetic brake. An electric hoist is used to lift the load. Operating mode - 3K GOST 25546-82 Power current - three-phase. Voltage 380 V, frequency 50 Hz. Current lead - cable. Crane runway: rail R43 GOST 7173-54, square 60 GOST 2591-2006.