PDC water drill bits

Due to the ever-increasing volume of development of new oil and gas fields, the growing demand for fresh water and geothermal wells, the demand for wear-resistant PDC bits of the latest generation is constantly increasing. PDC bits have a number of advantages.

First of all, they are distinguished by the absence of moving parts in the design (this gives confidence that part of the bit will not remain in the rock during drilling and reduces the risk of accidents), unprecedented strength, which allows the bits to practically not wear out and increase the level of penetration, the ability to bypass the minimum axial load at high drilling speeds. This significantly improved drilling performance both in terms of mechanical speed and the length of flights, which reduced the number of STRs (trips).

The quality of cleaning increases due to the spiral calibrating surface, it also significantly reduces torque and allows the bit to avoid turbulence. The presence of stabilizing elements in the design reduces vibration, eliminates the risk of fracture of the cutters, and allows the use of more technological control in the drilling process at a given course of the wellbore trajectory.

All this gives drillers the opportunity to reduce the cost of 1 meter of penetration.
You can order PDC bits from 88.9 mm to 490 mm in diameter from us.

BGK Group of Companies has specially developed and produces PDC bits for water drilling.

Low cost and high productivity will provide a good economic effect.

Drilling rigs is not required for drilling with PDC bits.