Drilling RIG URB - MINI
The installation is mounted on a GAZ-3308, GAZ-66, Ural, KamAZ, MTLB chassis and is driven by a car engine (or from a deck engine).
A hydraulic rotator moving around the mast is used for drilling, building up a drilling tool without interruption from the bottom and, together with a hydraulic jack, performs the work of lowering (raising) the tool and feeding it during drilling. The rotator moves along the mast with the help of a hydraulic cylinder and a tackle system.
The rig control is fully hydroficated and focused on the driller console. On the panel there are control devices and controllers of the face force, feed and lift speeds, as well as the spindle speed of the rotator.
SPECIFICATIONS:
Drilling depth
-structural exploratory wells with flushing 250m
-geophysical wells with 100m flushing
geophysical wells with a purge of 60 m
- augers 40m
190mm flushing drilling diameter
Flushing end diameter
93mm structural and exploratory wells
- 118 mm geophysical wells
Blowing diameter 118mm
Diameter of drilling with screws 150mm
Drill Speed 90.180 rpm
The highest torque 4000N / m
Rotator stroke 3100mm
Drill Rise Speed 0-1.1m / s