Mobile Buildings on Sleds/Runners

The nomenclature of buildings depends on their functional purpose: dormitory, office, control room, canteen with kitchen, bath-sauna, shower, first-aid post, laboratory, metalworking shop, drying room, warehouse, toilet, engineering buildings. Buildings are manufactured in three standard sizes by width: 2.4 m (vehicle transport clearance), 2.6 m, 2.8 m and three standard sizes by length 6.2 m, 8 m and 9 m. The height on the chassis is 3.64 m. The building has a metal frame to which wooden beams of the walls, roof and foundation joists are attached. The external cladding of the building is made of steel sheet. Internal cladding is made of MDF boards or, depending on the purpose of the building: plastic panels, MDF panels, clapboard, profiled or galvanized sheets. Floors are made of plywood of increased moisture resistance thickness or cement particle board, covering - linoleum. The thickness of the insulation depends on the climatic zone of operation. There is a vapor barrier layer under the internal lining. The windows are plastic with blinds and mosquito nets. Interior doors: swing doors - wooden, sliding doors. The outer door is metal, insulated. The electrical circuit is equipped with an RCD. The electrical wiring of the buildings is made of copper wire in cable channels.