Omniace RA3100 — Data Acquisition System
(Equipment / Material)
Model Number: RA3100
Condition: New
Made in: Japan
Location or Storage Country: USA
Service Engineering Support: Yes
Warranty: No
Price: Call for price
Description:
The Omniace RA3100 is a high‑performance data acquisition system designed to be fast enough for the laboratory and rugged enough for the field. It captures high‑speed switching waveforms and fast transient events, making it suitable for electric vehicle development and maintenance, solar power generation, inverter control monitoring, electronics, automotive, and railway applications. The RA3100 features multi‑channel input with maximum 36 analogue channels and up to 144 logic points, fast‑speed sampling up to 20 MS/s, and long‑term recording with 4 GB memory and 256 GB SSD storage. It offers a 12.1‑inch LCD touch panel for excellent visibility and operability, back‑scrolling for data viewing during measurement, and a wide range of monitor displays including Y‑T waveform, X‑Y display, and FFT analysis during measurement. The rugged design provides excellent vibration resistance, dust protection, and a strong handle for easy carrying. Anti‑noise protection ensures high accuracy in noisy environments.
Overview:
| ITEM | SPECIFICATIONS | |
| Display | 12.1-inch, TFT color LCD (1024×768) with capacitive touch panel | |
| Channel | Module slot ... 9 slots Analog measurement ... Max 36 channels (when a 4-channel voltage module is used) Logic measurement ... Max 144 channels (when a 16-channel logic module is used) | |
| Memory | Capacity | 2GW (1GW/ ch during 2-channel measurement) |
| Division Memory | 1, 2, 4, 8, 16, 32, 64, 128 division | |
| Sampling Speed | Memory recording ... Max 20MS / s (5ns) SSD recording ............. Max 1MS / s (1μs) | |
| Storage Device | Solid State Drive (SSD) 256GB SD card slot with support for SD/ SDHC / SDXC. For data storage after recording. USB memory using a USB port, for data storage after recording. | |
| Printer | Printing Method | Thermal printing using a thermal head |
| Paper Width | 219.5mm | |
| Paper Feeding Speed | 100mm / s to 1mm / min | |
| Effective Recording Width | 200mm・FS | |
| Printer Functions | Memory Recording | Fast-speed event recording to memory |
| SSD Recording | Recording of the input signal to the internal SSD | |
| Printer Recording | Recording of the input signal directly to a thermal printer *Any combination of memory recording, SSD recording, and printer recording is possible. | |
| Trigger | Uses | Trigger for start recording operations, trigger for memory recording |
| Source Channels | Analog / logic signals, manual triggers and external signal triggers of each module. | |
| Types | Level triggered, window triggered (memory recording triggered ), bit pattern triggered | |
| Trigger Filters | Level hold, count | |
| Trigger Output | Output signal when trigger conditions are met | |
| Monitor | Y-T Waveform Monitor | Display time changes for a measurement signal in a pulse amplitude waveform |
| X-Y Waveform Monitor | Data is plotted with common points, with Signal 1 as the X axis and Signal 2 as the Y axis. | |
| FFT Analysis Monitor | FFT analysis of the measurement signal of any two channels is performed, and the analysis results are displayed as the frequency axis data. | |
| Recording and Display | Y-T Waveform | Displayed graphs ... 1 graph |
| Sheets ... Measurement channels are displayed in three sheets, and 48 channels are registered per sheet. | ||
| Grid ... 20 div vertically and 20 div horizontally | ||
| Time axis data count ... 100 data /div | ||
| Chart paper resolution ... Pulse amplitude axis 8dot/mm, time axis 80dot/mm (at 25mm / s) | ||
| X-Y Waveform | Data selection ... Select from input signal or recorded data | |
| Displayed graphs ... 1 graph, 4 graphs | ||
| Grid ... 20 div vertically and 20 div horizontally | ||
| Sampling Speed ... Max 1KS / s | ||
| Locas ... ON/OFF of locas enabled (pen up& down) | ||
| Printing ... Print the plotted X-Y waveform with the printer | ||
| FFT Analysis | Data selection ... Select from input signal or recorded data | |
| Sampling points ... 1,000, 2,000, 5,000, or 10,000 points | ||
| Max analysis frequency ... 1/2.5 times the sampling frequency | ||
| Displayed graphs ... 1 graph, 2 graphs. The Y-T waveform can also be displayed | ||
| Displayed graphs ... Waveform in time axis , linear spectrum, RMS spectrum, power spectrum, 1/1 octave, 1/3 octave,Transfer function, cross power spectrum, and coherence function | ||
| Window function ... Hanning window | ||
| Average processing ... Time axis simple addition average, frequency axis simple addition average,frequency axis exponentially weighted average, frequency axis peak hold | ||
| Interface | LAN | 1000BASE-T (1Gbps) ... For control with communication command |
| COM | RS-232C ... For control by communication command or for UPS shutdown | |
| USB | Ver. 3.0 2 port ... For storage devices (USB memory) | |
| Video Output | DVI-D | |
| Operating Environment | Temperature 5 to 40°C Humidity 35 to 80% RH (without condensation) | |
| Power Supply | 100 to 240VAC, Frequency 50 to 60Hz Power consumption 300VA or less (under the maximum load conditions) | |
| Dimensions | 394 (W) × 336(H) × 200(D) mm *Excluding projections | |
| Weight | 9.5kg or less (main body only) 11 kg or less (when main body and four 2-channel voltage modules are installed) | |
A&D Inspection
Locations: 4622 Runway Boulevard, Ann Arbor, MI 48108, USA
Main Products/Services: Weighing and inspection equipment (checkweighers, metal detectors, X‑ray systems), data acquisition systems (Omniace series), ultrasonic thickness testers, industrial scales, balances, laboratory instruments, service programs
Year Established: 1977