Falcon SW

¹

Hydraulic brake alternative / operating pressure 130 ± 5 bar.

²

Approximate weight of the most common machine configuration. The exact weight may vary significantly depending on the specific equipment. Contact your sales representative.

³

Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.

Sowing section: narrow-row sowing (grain, rape)

Sowing section: wide working width sowing (corn, sunflower)

We constantly improve and innovate our products to provide the best possible solutions for current technological trends and to meet customer requirements. For this reason, some of the offered products may be manufactured differently than shown on the website. Binding specifications and machine parameters will be confirmed upon order.

Modulability

Wide Selection of Working Sections

You can choose from a wide offer of versions in each working section according to the selected sowing or cultivating technology with fertilizer application. You can choose the size of the bin, pre-processing section, sowing section as well as cultivating section.

Hopper

Large hopper
Hopper with capacity of 4 / 6 m³, a two-chamber hopper with capacity of 6 / 8 m³ can be supplied upon request, seeds and fertilizer distribution 60:40.

Rear Section

Connection via three-point hitch, cat. 3.

Double-disc sowing section (spacing 12,5 / 15 / 16,7 cm), up to the width of 9 meters
Spacing 12,5 / 15 / 16,7 cm – suitable for sowing cereals, legumes

Double-disc sowing section (spacing 25 / 30 / 33,4 cm), up to the width of 9 meters
Spacing 25 / 30 / 33,4 cm – in combination with the pre-processing three-row chisel section STRIP TILL, it is suitable for strip soil tillage, sowing with fertilization in a single line up to the depth of 25 cm. Ideal for sowing winter rape.

Precise sowing of wide-row crops, working width 6 / 8 rows at spacing of 70 / 75 cm
For sowing wide-row crops (corn, sunflower). With possibility of fertilization on both sides of the row.

Pre-processing Section

The Falcon SW Modular Seed Drill allows for work without the front pre-processing section. A pre-processing section can be installed upon request.

Pre-processing disc section for full-area soil processing
A universal working section, soil processing up to the seedbed depth, max. 10 cm. Possibility to combine with the front Flexi-board paddle leveller.

Flexi-board – front paddle leveller
For uniform spreading of clods and crop residue along the entire machine width.

Pre-processing 4-row chisel section for full-area soil processing
Mainly suitable for wet conditions – sowing spring crops.

Pre-processing 2- row chisel section (spacing 25 / 30 / 33,4 cm), for STRIP-TILL technology + disk roller, diameter 58 cm
Strip-till loosening with the option of additional fertilization using granulated fertilizers up to the depth of 25 cm.

Recommenced Combinations of Falcon SW Modular Seed Drill

	Main Crops	Front Pre-processing Section	Rear Sowing or Processing Section	Additional Fertilization
	cereals legumes	no pre-processing section disc section disc section + Flexi-board Flexi-board 4-row chisel section	double-disc sowing section for sowing narrow-row crops (spacing 12.5 / 15 / 16.7 cm)	YES
	corn sunflower	no pre-processing section disc section disc section + Flexi-board Flexi-board 4-row chisel section	precise sowing of wide-row crops (spacing 70 / 75 cm)	YES
	winter rape	STRIP chisel section (spacing 25 / 30 / 33,4 cm)	double-disc sowing section with sowing in line of soil processing (spacing 25 / 30 / 33.4 cm)	YES

Optional

Display Units

iPad wifi connect

Seed counting and sowing control for each individual coulter.

Topcon XD+

Müller Elektronik: ISOBUS DRILL-Controller

ME TOUCH800®

Müller Elektronik: ISOBUS DRILL-Controller

ME SMART570®

Müller Elektronik: ISOBUS DRILL-Controller

Working tools

Chisel MULTICARBIDE

Chisel CARBIDE

Tillage disc

Coulter disc

Fertilising disc DURA+

Flexi-board paddle

Formation of tramlines

Tramline valves

Section Control

Optional equipment

Filling auger conveyor

Machine work lights

Seed level sensors in the dispenser

Sifter for hopper

Fan with cooler

Hydraulic motor for fan drive via tractor PTO

Micro Drill

Sowing of fine seeds.

A cart for easy exchange of front section