Uniroller 200 - Unwinder of tight coils with an inner Diameter of 100 mm

According to the device and the principle of operation, the UNIROLLER 200 device is similar to the UNIROLLER 300/400 device, but unlike them, it is equipped with a core that does not have diameter adjustments.

In this device, the core on a rotating stand is a cylinder with a corrugated surface, on which you can put cable coils or wires with a small inner diameter - from 100 mm. After that, you can unwind the cable or wire without twisting it, without the formation of loops and nodes.

If you already have at your disposal any of the UNIROLLER 300 or UNIROLLER 400 devices, then if you need to unwind tightly wound coils, these devices can be easily transformed into the UNIROLLER 200, replacing the core of these devices with an unregulated core. For such a transformation, you must additionally purchase the UNIROLLER 205 kit.

If you need to unwind a tightly wound wire coil

TECHNICAL DATA :
The maximum weight of the bay: 50 kg
Bay Stand Diameter: 450 mm
Drum core diameter: 95 mm
Drum core height: 300 mm
Base area: 510 x 460 mm
Total device height: 435 mm
Device weight: 8 kg