OXYGEN (O2) Analyzer IN OXITEC 5000 SMOKE GASES
(Equipment / Material)
Model Number: 5000
Condition: New
Location or Storage Country: Russia
Service Engineering Support: Yes
Warranty: No
Price: Call for price
Description:
OXITEC oxygen analyzers are designed to measure the oxygen concentration in the flue gas generated during combustion processes, as well as in other non-combustible gases. The system consists of a measuring probe that records the oxygen concentration directly in the flue gas pipe, an electrical connection cable, a pneumatic connection cable, and an electronic unit. Probes and electronic components have different designs and can be used in standard and explosive areas. The operating principle of OXITEC oxygen analyzers is based on the Nernst equation using zirconium oxide as a measuring cell for measuring oxygen in process and flue gases.
Overview:
Measurement principle: | zirconium oxide |
Sensor material | V4A (1.4571 / 316SS) |
Pace. compensation: | electronic |
Full Scale Range: | 0-5 to 0-9000 ppm |
Response time: | <200 ms (0.5 s at gas velocity> 10 m / s) |
T90 test time: | 5 s (at gas velocity> 10 m / s) |
Accuracy: | ± 0.2% |
Gas temperature: | up to 1400 ° C |
Gas pressure: | from -50 to +50 mbar |
Gas speed: | from 0 to 50 m / s |
Output signal: | standard - 4-20 mA; optional - RS 232, RS 485, Fieldbus, HART |
Screen: | graphic display, LED backlight |
Ambient temperature: | - for electronics: -20 ... + 60 ° С - for probe: -40 ... + 80 ° С - the ability to complete with heated covers, cabinets |
Degree of protection (terminal part): | IP65 |
Definition Limit: | less than 1 ppm O2 |
Power consumption: | via electronics |
Voltage: | 230V / 50-60Hz ± 10% |
Power consumption: | 400VA during heating 100-200VA during operation |
Fuse: | 10A |
Lifetime: | more than 10 years, depending on the application |
LLC "MS Service"
Locations: Russia Moscow
Main Products/Services: Production and supply of analytical equipment. Environmental Monitoring System MS3550
Registration: Russia Moscow