ACB-25 tank Semitrailer
(Equipment / Material)
Model Number: АЦБ-25
Condition: New
Made in: Russia
Location or Storage Country: Russia
Location: Russia / Naberezhnye Chelny
Service Engineering Support: Yes
Warranty: No
Price: Call for price
Description:
Tank semi-trailer АЦБ-25 - is used for transportation of liquid bituminous materials in hot (up to + 200 ° С) or cold state. Steel, circular cross-section with internal partitions, thermally insulated with a 50 mm fiberglass layer and lined with steel sheet 0.8 mm thick, the tank holds at least 25 m3. The car is presented in two modifications: АЦБ-25-00 - with a bitumen pump, АЦБ-25-01 - without a bitumen pump.
Overview:
АЦБ-25-00 equipment provides the following operations:
- filling and emptying the tank;
- pumping bitumen into an external container, bypassing the tank;
- circulation of bitumen in the tank;
- heating the bitumen in the tank to the operating temperature.
АЦБ-25-01 equipment provides the following operations:
- filling the tank with the upper method and emptying the tank by gravity;
- heating the bitumen in the tank to the operating temperature.
|
|
Technical characteristics of the ATsB-25 tank semi-trailer:
| Indicator name | The values | ||
| АЦБ-25-00 | ACB-25-01 | ||
| Curb weight, kg, not more | 10700 | ||
| Full weight, kg, no more | 34700 | ||
| Gross weight distribution, kg, no more: | |||
| through the support device | 20500 | ||
| via trolley | 14200 | ||
| Gross weight distribution in the road train, kg, no more: | |||
| through the fifth wheel of the tractor | 12500 | ||
| via trolley | 22200 | ||
| Overall dimensions, m, no more: | |||
| length | 10.97 | ||
| width | 2.5 | ||
| height | 3.61 | ||
| Tank | Steel, circular cross-section with internal partitions, thermally insulated with a layer of fiberglass 50 mm and lined with steel sheet 0.8 mm thick | ||
| Tank capacity, m3, not less | 25 | ||
| Maximum transport speed, km / h | 85 | ||
| Bitumen pump | Gear, feed 0.7 l / rev, maximum delivery head 30 m | - | |
| feed at a speed of 700 rpm, l / min, not less | 500 | - | |
| Bituminous pump drive type: | Hydraulic drive from hydraulic system tractor | - | |
| Working pressure in the hydraulic system, MPa (kgf) | 16.0 (160) | - | |
| Time of filling (emptying) the tank with its own pump, min, no more | fifty | - | |
| Time for emptying the tank by gravity, min, no more | 40 | ||
| Heating bitumen in a tank | Stationary burners through the flame tubes | ||
| number of burners, pcs. | 2 | ||
| Type of fuel | diesel fuel | ||
| Fuel consumption by two burners, (l / h), no more | eighteen | ||
| Burner fuel tanks capacity (l) | 2 tanks of 20 liters. | ||
| Fuel supply to the burner | Compressed air from pneumatic chassis | ||
| Heating bitumen in communication | Portable burner | - | |
| Heating rate of liquid bitumen in a tank at an initial temperature plus 80 ° С, ° С / h, not less | 10 | ||
| Reducing the temperature of the bitumen in the tank within 1 hour: | |||
| - in the parking lot | Not more than 3% of the drop ambient temperatures and bitumen | ||
| - when transporting at a speed not exceeding 50 km / h | Not more than 4% of the drop ambient temperatures and bitumen | ||
| Service staff | 1 person (driver-operator) | ||
Note:
- A set of 2 metal filling hoses (length 3m each) is included in the standard configuration.
- Recommended tractor Kamaz-6460, MAZ three-axle.
- Requirements for the hydrofication of a tractor (for АЦБ-25-00): a hydraulic tank with a volume of at least 100 liters, a safety valve, the presence of 3 lines: pressure, drain, drain.
Continental-K
Locations: Russia / Naberezhnye Chelny
Main Products/Services: Manufacturing, development, sale of vehicles
Registration: Russia / Naberezhnye Chelny