KZhO-4 oil and gas Sampler liquid Container 50MPa

Single liquid container KZhO-4 is designed for taking samples of liquid, gas-liquid and gas hydrocarbon mixtures, transporting them to the place of research and issuing them to the research equipment. It is applied in laboratories and on fields of the oil and gas industry. Working medium - gas-liquid and gas hydrocarbon mixtures. The container is operated in temperate and cold climatic regions in accordance with GOST 16350-80. Location category during operation -1 according to GOST 15150-69. Main technical data and characteristics: Liquid container KZhO-4 KZhO-1 KZhO-5 KZhO-1000 KZhO-4000 (4 liters) Usable volume 400 cm3 (100, 150, 200…. 1000 …..2000….. 5000 cc) Type of valve - Angle with manual drive. KZhO-4 is used in laboratories and in the fields of the oil and gas industry. To take samples from the separator or wellhead fittings, it is necessary to open both valves and pass the investigated hydrocarbon phase through the container in the amount of five times the volume of the working cavity of the container. Then close the outlet valve, and after reaching the required pressure, close the second valve. There are several ways to drain samples from the container into the research equipment: - using a higher pressure compared to the formation pressure during the transfer process; - displacement of the sample from the container by means of a neutral liquid entering one of the pressure valves. Connect the second valve to the research apparatus. - heating the container to reservoir temperature and mixing the contents (swinging the container). In this case, place the container in a thermal bath. Locking device. Needle with metal-to-metal seal. Nominal passage, mm 3 Working pressure — 35 MPa as standard, up to 70 MPa on special order Permissible working medium temperature: +85 С Operating medium temperature range: from -60 to +85 С (degrees) Working pressure is kept in the container for at least 10 days. Shelf life 12 years - with a regulated inspection and replacement of repair kits