Water Softener WATEX CMS

Description

·          Effective solution for water softening, iron, manganese and ammonium removal

·          Regeneration with brine solution from salt tablets (NaCl)

·          Reliable and efficient operation more than 10 years

·          Apply for private houses, cottages, guesthouses connected to central water supply systems

·          Automatic purification and regeneration by volume control

·          Simple installation and maintenance

·          Low operating costs

·          High quality materials, components

·          Filter does not remove smell. WATEX CMB or CTO or AERO should be installed in addition

WATER QUALITY PROBLEM

Hardness salts, Ca and Mg form scale deposits on heat exchangers, nozzles, fittings, pipes, sanitary facilities. Fine technical equipment rapidly out of order or increasing power consumption.

SOLUTION

The solution of these problems for households and production needs is softening by WATEX CMS series ion exchange resin filters (reduces limescale) that are regenerated with NaCl. Water softening equipment also effectively reduce iron, manganese and ammonium.

FILTER PERFORMANCE

 For recovery of filtration media (ion resins) reagent (NaCl or salt tablets) is used. Wastewaters produced in regeneration processes of equipment in WATEX CMS  can be directly discharged to biological wastewater treatment plant. WATEX CMS consists of a filter tank, control valve and brine tank. The filter column is filled with ion exchange resin (cationic), which reduces hardness and iron concentration in water. The control valve performs automatic regeneration. Salt tank is filled with a reagent (NaCl, salt tablets) for resin regeneration. Capacity of filtration media is calculated according to amount of resins and raw water quality.                

FILTER CONTROL

 WATEX CMS is equipped with a Clack WSCI1 control valve, with a built-in flow meter that performs ion exchange resins regeneration according to water consumption. Flowmeter saves water and salt used for filter regeneration. The valve can be fitted with a bypass pipeline that allows to perform maintenance works with ease. Control valve saves all information in case of power failure. Equipment has many parameters that can be adjusted according to needs, such as washing time, frequency, reagent consumption, and so on. It is possible to change the water hardness.  

EQUIPMENT MAINTENANCE                                 

Although softener uses salt tablets for regeneration it is safe to use filtered water for drinking and other human needs. It is necessary to provide electricity connection power (one socket), sewerage drainage and incoming / outgoing water supply with minimum pressure of 2.5 bar.              

RECOMMENDATIONS

·          Before selection of water filter, it is recommended to test raw water chemical composition.

·          Before the water filter, it is preferable to install mechanical filter to ensure long-term equipment service life.         

Additional equipment options:

·          Condensate isolation for tank

·          By-pass valve – For easier assembly

·          Repair and maintenance kit – Spanner wrench, injectors (2 pcs.)