Cable VVG 6kV

1 - Sheath 2 - Polymer tape winding 3 - Copper wire or copper tape screen 4 - Conductive tape 5 - Separating layer 6 - Insulation 7 - Conductor DESCRIPTION: Power cable with insulated copper conductors with a copper screen, a separating layer made of PVC plastic, in a sheath and an inner sheath made of PVC plastic. CONDUCTOR ACCORDING TO GOST 22483 1. Copper, multi-wire, round, class 2. Number of cores: 1 or 3, cross-section of 25-50 sq. mm. 2. Copper, multi-wire, sector-shaped, class 2. Number of cores: 3, cross-section of 70-240 sq. mm. INSULATION AND SHEATH: VVG Insulation made of polyvinyl chloride plastic; Sheath made of polyvinyl chloride plastic. VVGng(A) Insulation made of polyvinyl chloride plastic; Sheath made of low-flammability polyvinyl chloride plastic. VVGng(A)-LS Insulation and sheath made of low-fire hazard polyvinyl chloride plastic with reduced smoke and gas emission. VVGng(A)-HL Insulation made of polyvinyl chloride plastic; Sheath made of low-flammability and high cold resistance polyvinyl chloride plastic VVGng(A)-LS-HL Insulation and sheath made of low-fire hazard polyvinyl chloride plastic with reduced smoke and gas emission. APPLICATION: The cables are intended for transmission and distribution of electric power in stationary electrical installations with a rated alternating voltage of 0.66 and 1 kV and a rated frequency of 50 Hz. The cable is intended for laying single cable lines in cable structures and premises. When laying such cables in groups, the use of fire protection means is mandatory. Cables with the index "-ng(A)", "-ng(A)-HL" are intended for group installation in cable structures of outdoor (open) electrical installations (cable overpasses, galleries). Cables with the index "-ng(A)-LS", "-ng(A)-LS-HL" are intended for group installation of cable lines in cable structures and premises of indoor (closed) electrical installations, including at nuclear power facilities. For electrical wiring in residential and public buildings.