Mobile Drilling rigs MBU-100

(Equipment / Material)

Model Number: МБУ-100

Condition: New

Location or Storage Country: Russia

Location: Russia Moscow

Service Engineering Support: Yes

Warranty: No

Price: Call for price

Description:

The MBU 100 drilling rig is designed for rotary and bottomhole drilling of production and exploratory wells, repair and restoration of oil and gas wells in macroclimatic regions with temperate and cold climates at ambient temperatures from minus 45 to plus 45 ° С.

Overview:

Accommodation category 1 according to GOST 15150-69.

The depth of well drilling is 2200 m (when drilling a column of 28 kg / m). The conventional depth of wells during repair and development is 5000 meters (tubing 14 kg / m).

The installation consists of the following main blocks:
- a lifting block on an off-road chassis BAZ-69096, MZKT-7004-011.
- the mobile block of the drilling base and the receiving bridge are mounted on a three-axle trailer model OZTP-84703V.

SPECIFICATIONS:

Name	MBU 100
Permissible load on the hook, kN (tf)	981 (100)
Permissible load on the hook without installing guy rods on the ground, kN (tf)	work without installing braces is not allowed
Gear drive	BAZ-69096 - YaMZ-8424.10 chassis engine
	MZKT-7004-011 - chassis engine TMZ-8431.10 or Caterpillar C 15
Drive power, kW (hp)
TMZ-8431.10	346 (470)
YaMZ-8424.10	330 (450)
Caterpillar c 15	354 (480)
Tower:	telescopic, two-section, inclined with an open front face, it is possible to install a top drive
distance from the earth to the crown block, m	thirty
candle length, m	16, 18
angle of inclination at a distance from the axis of the hook block	4 ° ± 5 ′
to the axis of the rear outriggers 2200 ± 50mm
Capacity of riding shops of horse riding workers:
drill pipe D 114 and 127 mm, linear length, m	2200
Tubing and drill pipe D 73 and 89 mm, linear length, m	5000
Filling system:	with wire rope bypass device
rigging	4 x 5
diameter of wire rope, mm	25
Drill winch:	single drum, with pneumatic disc
	clutches and two-shaft belt brake
traction effort, kN (hardware)	137 (14)
hook block lifting speed, m / s	0.15 ... 1.5
Hydrodynamic brake:
inclusion	operational, disc pneumatic clutch
hook block descent speed with a load of 75 tons, m / s	0.9
Hydraulic system:	working	assembly
pump type and model	axial piston	gear
	310.2.112–2 pcs.	NSh-50M4–1 pcs.
nominal pressure, MPa (kgf / cm2)	11.8 (120)	13.7 (140)
rated flow, l / min	380	113.7
Hydrobreaker:	2 pcs.
stroke of a rod, mm	1000
developed effort, kN (tf)	49 (5.0)
Auxiliary hydraulic winch:	2 pcs.
permissible load on the hook, kN (tf)	29.5 (3)
Emergency electric drive:
electric motor power, kW	thirty
hook block lifting speed with a permissible load of up to 125 t / s, m / s	0.015
maximum hook block lifting speed, m / s	0.05
Explosion-proof lighting, V	220, (emergency 24) LED lights
Overall dimensions of the lifting block in transport position, mm:
on the chassis of BAZ-69096	21000х3250х4500
on the chassis of the MZKT-7003	21000х3250х4500
Mass of the lifting block in transport position no more than, kg	50,000
Service life, years	fifteen

TECHNICAL CHARACTERISTICS of the completing equipment:

Drilling rotor RUP-560:
drive unit	mechanical	hydraulic
passage opening, mm	560	560
permissible load on the table and wedge grip, kN (tf)	981 (100)	981 (100)
driving power, kW (hp)	180 (240)	120 (160)
maximum torque, kN ∙ m (kg ∙ m)	19.6 (2000)	15.7 (1600)
highest rotational speed, s-1 (rpm)	2.5 (150)	1.66 (100)
diameters of pipes captured by wedge suspension, mm (according to order)	60, 73, 89, 102, 114, 127, 140, 146, 168, 178, 194, 219, 245, 273, 299, 324, 340
Swivel drill VB-100:
permissible load, kN (tf)	981 (100)
bore diameter, mm	75
highest rotational speed, s-1 (rpm)	6 (360)
wireline diameter, mm	8 ... 11
Wellhead work site
transformable, height-adjustable, m	13
length m	2 ... 3
width m	2,5 ... 4
Block of the drilling base and bridges:
distance from the earth to rotor beams, mm	4500	6000
permissible total load, kN (tf)	1570 (160)	1570 (160)
Manifold (riser with drill sleeve):
passage section, mm	75
working pressure, MPa (kgf / cm2)	19.6 (200)

By agreement with the customer, additional equipment is possible.

The warranty period of operation of the unit is 12 months from the date of commissioning, but not more than 18 months from the date of manufacture.

Company Profile

CJSC “Drilling OIL AND FIELD Equipment”

Main Products/Services: Products for drilling and equipping wells

Registration: Russia Moscow

Year Established: 2012