Add product
Product / Equipment

2” Slickline Setting Tool

(Equipment / Material)
Model Number: 2” Slickline Setting Tool
Condition: New
Location or Storage Country: Norway
Service Engineering Support: Yes
Warranty: No
Price: Call for price
Overview:

The Slickline Setting Tool has unique design allows to set Gauge Hangers using the pulling force of slickline or wireline. 

The Slickline Setting Tool does need neither well nor nitrogen pressure to create a powerful setting stroke. The Setting Tool initial activates the Gauge Hanger by the pre-loaded powerful compression spring when the Electronic Timer releases the spring and after that a high setting force is created by pulling the slickline. 

The force relation between the pulling force on slickline and delivered setting force is 1:18. The Stroke Force is limited by tensile strength of the slickline. 

The Slickline Setting Tool is fully balanced to well pressure and no calculations for shear pins prior to running are required. 

In case when the emergency disconnect of the Setting Tool from the Gauge Hanger is required, the Setting Tool can be released by jarring upwards.
 

Main advantages

  • Neither well or nitrogen pressure needed for activation
  • Setting force generated by pulling on slickline 
  • Fully balanced to well pressure
  • Interior parts are protected from well fluidHydro mechanical booster force relation 1:18
  • NACE MR0175 suitable materials
  • Nitride surface treatment increases longevity
  • Jarring up shearing for emergency release
  • Simple redressing

Technical specifications

  • Tool OD – 2.000 inch
  • Overall Length – 107.61 inch
  • Weight – 29.32 lb
  • Top Connection – 1-1/16-10-UNS
  • Fishing Neck Size – 1.375 inch
  • Stroke Length – 3.88 inch
  • Setting Force – 18lbs for each 1lbs pulling force on slickline
  • Max Well Pressure – 10,000 PSI
  • Max Working Temperature – 150 C

INGINEERING AS

Main Products/Services: Subsea well intervention & work-over equipment