×
Synchronous (Valve) motors 6DVM
(Equipment / Material)
Model Number: 6ДВМ
Condition: New
Location or Storage Country: Russia
Service Engineering Support: Yes
Warranty: Yes
Price: Call for price
Description:
The 6DVM series brushless electric motor is a three-phase synchronous motor with flange mounting. The motor is designed for industrial applications. This model features permanent magnets on the rotor.
Overview:
1. Purpose
6DVM valve motors are three-phase synchronous machines with flange mounting and excitation from rare-earth permanent magnets located on the rotor.
Intended for use in general and special engineering products.
The motors are controlled by specialized electric drives of the ESD1 type (they ensure the maintenance of a given direction and speed of rotation).
2. Design features and advantages
| Characteristic | Description |
|---|---|
| Type | Synchronous valve, flange mounting |
| Rotor | On permanent rare earth magnets (no slip rings or brushes) |
| Rotor position sensor | Built-in resolver (standard) |
| Optional | Built-in zero-backlash magnetic electric parking brake (24–27 V, up to 1 A) |
| Speed control | Range up to 1:10000 |
| Overload capacity | High, due to powerful magnets |
| Reliability | The absence of sliding contacts increases the service life |
| Weight and dimensions | Improved over traditional machines |
3. Technical characteristics (generalized)
| Parameter | Meaning / Note |
|---|---|
| Nominal operating mode | S1 (long-term) according to GOST IEC 60034-1 |
| Acceptable moments | – at 0…0.25 n<sub>max</sub> : ≤ 1.0 M<sub>do</sub> – at 0.25...0.5 n<sub>max</sub> : ≤ 0.8 M<sub>do</sub> – at 0.5...1.0 n<sub>max</sub> : ≤ 0.5 M<sub>do</sub> |
| Additional modes | S2–S8 with the same moment limits |
| Degree of protection | IP54 according to GOST IEC 60034-5 |
| Climatic performance | O2 according to GOST 15150 |
| Operating temperature range | from –50 to +50 °C |
| Mechanical impacts | Group M8 according to GOST 17516.1 (vibration, shock) |
| Orientation in space | Any |
Note: The exact values of torques M<sub>dо</sub>, nominal speeds n<sub>max</sub>, dimensions, weights, and connection dimensions are not provided on this page. They are determined by the specific motor size.
4. Performances and variations
The following design options are listed on the page:
- Standard – with built-in resolver sensor;
- With brake - built-in backlash-free electromagnetic parking brake (normally open), power supply 24–27 V, current up to 1 A. The brake is intended only for fixing the stopped shaft, not for stopping the rotating motor .
The standard size range (torque, power, and mounting dimensions) is not publicly available on the website. To select a specific model, please contact the developer, specifying the required torque, speed, and operating conditions.
5. Delivery set
Standard composition (specified when ordering):
- engine in the selected design (with resolver, with or without brake);
- a set of technical documentation (passport, operating manual, dimensional drawing);
- if necessary – coordinated installation elements.
The ESD1 electric drive, required for engine control, is supplied separately.
6. Operating conditions
| Parameter | Meaning |
|---|---|
| Ambient temperature | –50 … +50 °С |
| Degree of protection | IP54 |
| Altitude | not specified (specify) |
| Seismic resistance | not specified, but corresponds to group M8 for mechanical impacts |
| Environment | non-explosive, climatic version O2 (all-climate) |
7. Areas of application (purpose)
Due to the wide speed control range (1:10000), high overload capacity and resistance to mechanical impacts, the 6DVM series motors are used in:
- machine tool building and robotics;
- special equipment (including those with strict reliability requirements);
- industrial mechanisms with increased requirements for positioning accuracy and smooth running;
- products operating in a wide range of temperatures and vibrations.
8. Ordering and obtaining detailed information
To select a specific size of the 6DVM engine, you need to:
- Determine the required parameters: nominal torque, speed range, presence of brake, operating conditions.
- Contact JSC ChEAZ (IPC Privodnaya Tekhnika) with a technical request.
- Request up-to-date catalog data, dimensional and connection drawings, and a connection diagram.
Developer and manufacturer:
JSC "ChEAZ", engineering and production complex "Drive technology".
JSC "Cheaz" (Joint-Stock Company "Cheboksary Electrical Equipment Plant")
Locations: 428020, Russia, Chuvash Republic, g. Cheboksary, pr. I. Yakovleva, d. 5
Main Products/Services: Complete transformer substations, complete switchgear units (SSU), low-voltage complete devices (LVCD), relay protection and automation devices (RPA), low-voltage control equipment, explosion-proof electrical equipment, adjustable electric drives, energy-saving equipment, automation and digital substations.
Registration: 428020, Russia, Chuvash Republic, g. Cheboksary, pr. I. Yakovleva, d. 5
Year Established: 2000