Chamber Electric Furnaces for heat Treatment of metals up to 1300°C, AGNI-PK series

Main characteristics

• The lining ensures maximum energy savings due to its low thermal conductivity and heat capacity. The lining is a multilayer composite made of modern, highly efficient thermal insulation, consisting of lightweight, thermally shock-resistant brick and ceramic fiber boards.
• The working volume of the furnace chamber may vary depending on the customer's needs.
• Maximum operating temperature of the oven, °C – 1300.
• Temperature uniformity during holding, °C – ±10.
• Heating process control – microprocessor PID controller Thermodat-16E6, the device is equipped with a USB-port for storing archived data on a flash drive
• Regulation accuracy, °C – 1.
• Heating in the furnace is carried out from three sides - the bottom and the side walls.
• The heaters in the furnace are located on ceramic tubes and are made in the form of spirals made of Superfechral X23U5T material.
• The thermocouple used in this furnace is type TPP(S)
• The furnace can also be prepared for the placement of an immersion thermocouple.
• The thermocouples used in the furnace are manufactured in Russia, are included in the state register of measuring instruments, and have a full set of metrological documents.

Documentation

• Operating manual for the oven.
• Operating manual for the controller.
• Passport for the stove.
• Certificates of initial verification of thermocouples.
• Certificate of initial verification of the controller.