Vortex self-Priming pump VKs

Pump advantages:

• self-priming - the ability to pump out air from the suction pipeline, and then the liquid;
• Compared to centrifugal self-priming pumps, vortex pumps are characterized by a higher self-priming speed or air pumping speed. They are most optimal for cleaning the residues of liquids from tanks, containers, barrels, reservoirs, when it is necessary to pump a gas-liquid mixture;
• small size;
• 3. Less sensitive to fluid viscosity. They can pump liquids with a viscosity of up to 800 cSt. the ability to pump out liquids with a viscosity of up to 800 cSt;
• the flow path of the pump is made of stainless steel X18H10 (AISI 304) or AISI 316;
• the use of mechanical seals by John Crane (England) in accordance with the pumped liquid, its temperature, operating conditions;
• domestic electric motors of Russian electrical plants;
• TR CU 010 or 012 certificate;
• Work under vacuum (when equipped with a double mechanical seal);
• complete set: adapters, frequency converter, starter, trolley;
• an axial inlet with a built-in check valve or a suction branch pipe made in the form of an elbow at the inlet to keep the liquid in the housing for restarting;
• possibility of long-term operation of the pump without the pumped liquid when the pump is equipped with a double mechanical seal. Dry run protection;

Engine:

General industrial or explosion-proof Ex version;
Rotational speed 3000 rpm, 1500 rpm, 1000 rpm, 750 rpm;
Single-phase 220V or three-phase 220 / 380V;
Protection degree IP54, IP55;
Gasoline or diesel drive;
Equipped with bearing temperature sensors;
Climatic modification and category of placement U1, UHL1, U2, U3, OM2.

Flow part material:

Pump casing, impeller, casing cover, lantern, shaft extension, wheel nut from 12X18H10T stainless steel.

Pump configuration options:

Completing the pump with a heating or cooling jacket for supplying and removing steam, hot water or heat carrier, electric heating.
Installation on a cart with a starter. Frequency converter.
Dry run protection. Long-term operation of the pump without the pumped liquid.
Threaded branch pipes with nuts, flat or tongue-and-groove flanges, counter flanges, gaskets, fasteners.
Stainless steel casing for the electric motor.
Axial inlet with built-in check valve or elbow-shaped suction inlet to retain liquid in the housing for restarting.
It is possible to manufacture with branch pipes for other flow sections.

Double mechanical seal with independent cooling system. Pump design for continuous pump operation without the pumped liquid.

Industry area

oil industry, bakery / confectionery, soft drink production, butter factories, dairy / cold storage plants, meat processing plants, farms / poultry factories, pasta factories, fish factories, breweries, distilleries and lvz, sugar factories, juice / canned food production, water utilities / water utilities uk / zhek / tszh, institutes / sanatoriums, boiler houses, production of household chemicals / cosmetics, fertilizer production, construction companies, pharmaceutical companies, chemical plants, pulp and paper mills, pressure boosting pumps, thermal power plant / hydroelectric power station, gok / metallurgy

Types of liquids

Water, milk, beer, wine, juice, fuel oil, melange, shampoo, gel, glue, paraffin, broth, condensate, kvass, car shampoo, balsam, bitumen, bischofite, glaze, glycerin, liquid glass, fatty acids, caramel, nitric acid , citric acid, formic acid, orthophosphoric acid, sulfuric acid, sulfamic acid, acetic acid, phosphoric acid, coagulant, color, kvass wort concentrate cks, blood, culture liquid, liqueur, lithol, marinade, technical oil, miscella, washing solution, liquid soap, tinctures, oil products, oil, oleum, pav, pesticides, plasticizer, surfactants, saline solution, reagents, cream, polyester resin, tomato juice, solid oil, sauce, soy sauce, tomato sauce, ammonium sulfate, copper sulfate, sodium sulfate, sodium sulfide, kvass wort, whey, heat carrier, thermal oil, liquid dough, fuel additives, brine, liquid fertilizer, centrate, chemical additives, chemical additives, refrigerant, coolant, electrolyte, PA emulsion raffin, ethanol, ethylene glycol, soft drinks, disinfectant solution, disinfectant solution, vacuum oil, spindle oil, hydraulic oil, industrial oil, coconut oil, machine oil, mineral oil, motor oil, petroleum oil, olive oil, rapeseed oil, vegetable oil, silicone oil, soybean oil, transmission oil, transformer oil, turbine oil, detergent, alkaline solutions, sea water, vodka, vegetable fat, frying oil, brine, soda solution, salt solution, sugar syrup, beer wort, alkali, isopropyl alcohol , methyl alcohol, ethyl alcohol, antifreeze, acetone, gasoline, butanol, gas condensate, gas oil, hexane, glycol, dioctyl phthalate, diethanolamine, caustic soda, corrosion inhibitor, caustic, caustic soda, kerosene, acrylic acid, hydrochloric acid, oxalic acid, xylene, fusel oil, methanol, methylene chloride, monoethanolamine, monoethylene glycol, sodium chloride, sodium hydroxide, sodium chloride, antifreeze liquid, nefras, hydrogen peroxide, gasoline additives, propylene glycol, potassium solution, solvents, ammonium nitrate solution, turpentine, solvent, diesel fuel, styrene, aluminum sulfate, toluene, fuel additives, diesel fuel, heating oil, brake fluid, antifreeze, trichlorethylene, triethylene glycol, phenol, formalin, formaldehyde solution, chemicals, chlorhexidine, methylene chloride, cyclohexane, sodium hydroxide

Manufacturer: Pumps and seals (Russia)

Design type: vortex pumps

Impeller design: Vortex impeller pumps

Number of impellers: Single-stage pumps

Submersion: surface self-priming pumps

Rotation Axis Location: Horizontal

Flow rate: 1 ... 30 m3 / h

Head: 2 ... 25 meters

Liquid temperature: -15 ° С ... + 130 ° С (version -50 ° С to +180 ° С)

Density: Up to 1.8 g / cm3

Viscosity: up to 800 cSt

Inclusions: up to 0.1% up to 0.2 mm in size

Max. pressure in the case: Up to 10 kgf / cm2