Single-girder Overhead Travelling cranes

Single-girder overhead travelling cranes (overhead cranes) are used to provide low-mechanization of production shops and loading and unloading operations both in closed shops and in open areas. The Gertek crane plant manufactures overhead cranes and produces single-girder overhead cranes with a lifting capacity from 1.0 to 16.0 tons and a span of up to 28.5 meters. A single-girder overhead crane can be located indoors: U3 - work indoors with natural ventilation; U4 - work indoors with artificial ventilation; In open spaces: U1 - work outdoors; U2 - work under a canopy with free air access at a temperature of -40/+40 ℃. Operating mode of single-girder overhead cranes according to GOST-25546-82: 3K - light duty; 5K - medium duty; 7K - heavy duty. Design of single-girder overhead travelling cranes: OPI - general industrial design; PBI - fire-safe design; Manual or electric hoists of Bulgarian, German or Russian manufacture can be used as a lifting mechanism; customer wishes and requirements are taken into account when manufacturing overhead travelling cranes. A productive and reliable electric single-girder overhead travelling crane and an electric overhead travelling crane are the best options for lifting and moving even heavy loads (10 tons and above) with maximum speed and economical power consumption. An electric overhead travelling crane has a hoist and gear motors, which are used as a movement mechanism for overhead single-girder travelling cranes. The price of an electric overhead travelling crane is determined depending on the equipment. When it comes to such an option as a overhead travelling crane with an electric-driven lifting device (hoist), it means a specialized single-girder overhead travelling crane, in which the electric hoist has a direction of movement along the installed span beam. Due to its high efficiency, the mobile crane beam will find its application in various workshops and industries. A manual crane beam, the price of which is significantly lower than an electric one, is distinguished by the need to use physical force, so this option is suitable for relatively small loads weighing 2, 5 or 10 tons. They are actively used in repair shops and service stations, during installation and construction work and in workshops. A manual crane beam of 2 tons and options with a higher lifting capacity have their own advantages, which our consultants will tell you about. A manual bridge crane beam can be suspended or supported. The first option uses I-beams fixed to ceilings or floors, in the second option, the mobile crane beam can move along special guides, and the load can move both horizontally and up or down. There is also a rotary crane beam, which is distinguished by a single-support design with the ability to rotate the crane horizontally. The rotary mechanism of the crane beam is reliable and durable.