Truck crane KS-55713-1K-1

The KS-55713-1K-1 truck crane with a lifting capacity of 25.0 t with a hydraulic drive, with a rigid boom suspension, mounted on a KAMAZ-65515 chassis, is designed to perform loading and unloading operations and construction and installation works at dispersed sites (performing work operations with ordinary and hazardous goods). The crane can move between sites on paved roads. The crane unit is driven by the chassis engine with a power take-off (PTO). The drive from the chassis engine significantly improves the economic, environmental and ergonomic noise indicators. The hydraulic drive system is equipped with reliable hydraulic components from foreign and domestic manufacturers: planetary gearboxes with a high torque reserve. The crane is equipped with a three-section telescopic boom 9-21 m long. When retracted, the boom provides the crane with compactness and maneuverability when moving, and when extended, it has a wide working area and a greater height for moving the load during operation. The telescoping system consists of one hydraulic cylinder and a system of pulley blocks. The ability to telescope the boom with a load on the hook allows the crane to perform special tasks: install loads in hard-to-reach places, carry them among assembled structures. The KS-55713-1K-1 truck crane has an increased support contour of 5.0 m x 6.1 m. Additional options: - To increase the lifting height, the boom can be equipped with a 7.5-meter lattice jib with the ability to be installed at an angle of 0 ° and 30 ° - to increase the lifting height of the hook and the working area of the crane. The jib is supplied complete with a hook suspension for single reeving. The jib is transferred from the transport position to the working position and back manually without the use of additional lifting equipment.