Welding suit for men summer

TR CU - 019/2011 GOST - 12.4.250-2019 Protective properties - class 2 for protection against sparks and splashes of molten metal, Tr Men's summer suit consists of a jacket and trousers. Jacket: central right-hand button fastening. Front panels with overlays in the front and on the sides, with pockets in the seam of the joint. On the front panels, on the inside, there are patch pockets on a contact tape. The back has a yoke that goes onto the front panel, with 3 ventilation holes in the seam where the yoke is sewn to the back. Yoke with shoulder pads and an overlay on the upper part of the back. Sleeves with overlays along the upper part, with internal wristbands with an elastic band along the bottom of the sleeves. There is a ventilation valve at the top of the lower part of the sleeve. The seam where the sleeve is sewn in is edged. Turn-down collar, fastens with a flap and a button. Trousers: Central fastening with a fly with a zipper and a button on the waist, with straps fastened at the front and back with buttons, the back part of the straps is made of elastic tape. The front halves of the trousers have side pockets with cut-off sides, with pads. On the inside of the front halves, in the knee area, there are patch pockets with shock-absorbing pads made of isolon, fastened at the bottom with a contact tape. The back halves have waist darts. The volume along the waist line is adjusted with flap buttons. Signal elements: reflective strip 50 mm wide. Main material: cotton fabric with fire-retardant impregnation, 500 g / m2. Pad material: technical fabric made of heat-resistant synthetic fibers, with siliconized coating. Material under pads: cotton fabric with fire-resistant impregnation, 350 g/m2.