Combat pants L6: Merkader Multicam

Heavy combat trousers for use in pouring rain, wet snow, strong wind. Fully adapted for work from vehicles and in urban areas - large area of 1000 D cordura reinforcements. Conceptually, they are a unique combination of L6 trousers with combat trousers. Usage options: Main layer over 1-2 layers. In this case, knee pads can be installed, including anti-fragmentation ones. The knee pad fits in height and width, just like in combat trousers. Wearable layer over combat trousers. In this case, the knee is protected by the standard knee pads of combat trousers. The inside of the knee area of the Merkader trousers is reinforced to prevent damage to the membrane by the knee pads of combat trousers. Main / Wearable layer over a full set of layers (1-7) in conditions of extreme subzero temperatures. Features: Large area of 1000 D Cordura reinforcements - the back in the seat area completely, the inner seam to the knee, the knee pad completely, the bottom of the trousers; Three-layer membrane 10,000/10,000, with fully taped seams; Completely self-dumping; Adapted for use with combat belts, the side zippers do not conflict with the belt equipment and do not rub. Compartments for knee pads, with convenient access on the zipper from the outside. Zipper under the protective flap. Fly with two runners; The volume of the trouser leg at the bottom is adjusted with an elastic cord and a Velcro tab. The volume of the trouser leg at the bottom is sufficient for use with voluminous shoes or boots (the trousers are worn on top).