Online UPS Sip380B120Bd.9-33 double Conversion 120 kVA three-phase floor-Standing with Galvanic Isolation Transformer
(设备/材料)
描述:
Online UPS SIP380B120BD.9-33 double conversion with three-phase input and output with a total power of 120 kVA with connection of external battery cabinets. Transformer inverter for galvanic isolation. Output power factor 0.9. Possibility of parallel operation of up to 6 UPS. Compatibility with generator sets and high overload capacity.
概观:
Input characteristics of the UPS
Nominal input voltage, V 380, 400, 415 V Input voltage range, V 380, 400, 415 V (- 25%...+ 20%) Input frequency range, Hz 50/60 Hz ± 5 Hz Nominal input current, A 246 amps Input power factor, W ≥ 0.95 (when using a filter) Input harmonic distortion coefficient Less than 5% when using a filter Voltage range in economy mode from - 40% to + 20% (customizable) Input connection type Terminal terminal, three phases + neutral UPS output characteristics
Nominal output voltage, V 380, 400, 415 V Output voltage accuracy ± 1% Topology and output voltage waveform Online UPS with "pure" sine wave output Output voltage distortion ≤ 3% on linear load Output frequency (battery mode), Hz 50, 60 Hz ± 0.05% Output power factor, W 0.9 Output connection type Terminal terminal, three phases + neutral UPS Specifications
Peak load factor 3:1 Overload capacity When operating from the mains: up to 110% - 30 minutes, up to 125% - 10 minutes, up to 150% - 1 minute Efficiency in mains mode 93% Efficiency in economy mode 98% Surge protection, J Built-in Filtration Input filter and built-in inverter transformer for galvanic isolation Bypass type Electronic and manual service bypass Bypass voltage range, V From - 40% to + 20% Bypass frequency range ±20% Availability of built-in batteries No Battery type Sealed lead acid with leakage protection DC bus voltage, V 384 VDC Battery life (50% and 100% load), minutes Depending on the capacity of the connected battery cabinet Recharge time Depending on the capacity of the connected battery cabinet Charging mode Intelligent charging with temperature compensated voltage Charging current, A 150 amps Time to switch to batteries 0 ms - from the mains to the battery Battery protection Protection against over-discharge, over-voltage, short circuit Communications and interfaces
Interface ports RS232/485 Internal slot for control card SNMP card slot or "dry" contacts Emergency Power Off (EPO) Eat LCD display and indication Digital LCD display and LED indication Sound alarm Power failure, low battery, overload, UPS error Working conditions
Operating temperature 0°C ~ 40°C Relative humidity during operation 0 ~ 95% Altitude 0 ~ 3000 meters - up to 85% load, 0 ~ 1500 meters - 100% load Storage temperature - 25°C ~ + 55°C Storage altitude above sea level 0 ~ 10000 meters (recommended) Physical characteristics
Heat dissipation in mains mode 36444 BTU/hour Noise level, dB less than 68 dB Size (W x D x H), mm 1520x830x1600 Package size (W x D x H), mm 1530x870x1832 Net weight, kg 1350,0 Gross weight, kg 1450,0 Compliance with standards
Protection class IP20, other versions available as an option Safety TR TS 004/2011, IEC 62040-1, IEC 60950-1 EMS TR TS 020/2011, IEC 62040-2, IEC 61000-4-2/61000-4-3/ 61000-4-4/61000-4-5/61000-4-6/61000-4-8

OOO "Svyaz Engineering"
地点: 115404, Moscow, 6th Radialnaya St., bldg. 9
主要产品/服务: Equipment for electrical networks