Frequency Converters of the C400 series

1. Purpose and scope of application

Main areas of application:

• pumps (hot/cold water, pulp, in water and heat supply systems, boiler houses, thermal power plants);
• conveyors, transporters, roller tables;
• crushers, mills, mixers, extruders, centrifuges;
• rolling mill equipment, drilling rigs, electric drills;
• machine tools, high-speed mechanisms (grinding spindles);
• production lines for film, cardboard, tape materials.

2. Key Features

3. Technical characteristics (generalized)

Detailed parameters (dimensions, currents, IP, design options) are not provided on this page. For a full specification, please contact ChEAZ JSC.

4. Variations (performances)

The official page does not provide a breakdown by size (dimensions) or by series depending on power.
Based on the experience of ChEAZ products, the following are usually provided for such lines:

• different design options (wall/floor);
• various degrees of protection (IP20, IP21, IP54 – on request);
• built-in options (EMC filters, brake modules, interface boards).

To clarify available modifications and their part numbers, please send a technical request to the IPC "Drive Technology".

5. Delivery set

Standard delivery composition (subject to clarification when ordering):

• frequency converter in standard design;
• removable control panel with RJ45 cable;
• operating manual (brief or full);
• set of mounting accessories (depending on the version).

The kit can be equipped with additional options: external filters, braking resistors, remote control extension cords, and adapters for industrial networks.

6. Operating conditions

These data are approximate and typical for FC-class equipment. It is recommended to check the datasheet for the specific model.

7. Advantages

• Energy savings of up to 50% due to speed regulation according to the actual load.
• Reduction of mechanical wear – smooth start and stop, reduction of hydraulic shock in pumping systems.
• Quick commissioning – automatic tuning of engine parameters, preset profiles.
• A single interface for the entire power range simplifies staff training and maintenance.

8. Ordering and obtaining detailed information

To order you need:

1. Specify the required power and conditions of use.
2. Request current technical data (dimensional drawings, connection diagrams, selection tables) from JSC ChEAZ.
3. Generate a questionnaire (indicate network parameters, engine parameters, operating mode, additional options).

Developer and manufacturer:
JSC "ChEAZ", engineering and production complex "Drive technology".