Submersible Asynchronous Electric motor (SAM)
(Equipment / Material)
Condition: New
Made in: Russia
Location or Storage Country: Russia
Location: Russia
Service Engineering Support: Yes
Warranty: No
Price: Call for price
Description:
The PED series submersible asynchronous three-phase, squirrel-cage, oil-filled, two-pole electric motors are designed for continuous operation from an AC power supply to drive centrifugal and screw pumps. Standard PED motors are available in sizes of 103, 117, and 130 mm. Power ranges from 8 to 400 kW (at 50 Hz). Frequency variations are permitted within 35–70 Hz, provided the rated current is not exceeded. Design options include single-, two-, and three-section motors. All manufactured electric motors feature a star-connected stator phase with a neutral conductor located at the bottom of the motor. Control stations control the motor's start, operation, and protection during emergency operation.
Overview:
Modifications: electric motors with increased voltage; with a submersible telemetry system; for completing water injection units (WIP); for completing units with two ESPs; equipped with a resonant wave complex RVC 1; equipped with a thermal protection device TZU.
Advantages and design features: manufacturing and assembly strictly adhere to technologies, instructions, and methods developed based on the experience of leading domestic and international companies. 100% incoming quality control is performed on materials and components manufactured under cooperation agreements. 100% operational quality control of manufactured products has been implemented; each stator has a process data sheet. At the customer's request, bronze sheet sections can be used in the stator at the rotor bearing locations. Electric motors are filled with MDPN oil, or, upon request, with MDPN-S synthetic oil. Shafts and couplings with straight-sided or involute splines can be equipped with two temperature indicator plugs installed in the check valve. The design allows for installation with both single- and double-body hydraulic protection systems from all Russian manufacturers. All connection dimensions are standardized with those of leading Russian manufacturers.
| Type | Asynchronous, three-phase, short-circuited, oil-filled, two-pole |
|---|---|
| Dimensions | 103, 117, 130 mm |
| Power | 8–400 kW (at 50 Hz) |
| Current frequency | 35–70 Hz (provided that the rated current is not exceeded) |
| Reservoir fluid temperature | Basic version: +120°C; heat-resistant: +150°C; especially heat-resistant: +170°C |
| Content of mechanical impurities | up to 1.0 g/l (relative hardness of particles no more than 7 points on the Mohs scale) |
| Hydrogen index of produced water (pH) | 5.0–8.5 |
| Hydrostatic pressure in the suspension area | no more than 40 MPa (400 kgf/cm²) |
| Hydrogen sulfide concentration (basic version) | up to 0.01 g/l |
| Hydrogen sulfide concentration (corrosion-resistant design) | up to 1.25 g/l |
| Design | One-, two- and three-section |
| Phase connection | Star with neutral wire brought out |
| Oil type | MDPN, MDPN-S (on request) |
| Modifications | With increased voltage; with a submersible telemetry system; for PPD; for installations with two ESPs; with RVC 1; with TZU |
| Application | Drive of centrifugal and screw pumps |
Limited Liability Company "New Technologies" (LLC "New Technologies")
Locations: Karl Marx St., 168 S, Chistopol, Republic of Tatarstan, Russia
Main Products/Services: Electric centrifugal pumps, submersible electric motors, hydraulic protection, devices for working with gas, submersible telemetry, control stations, cable lines and extensions, additional equipment (casing, filter, valves), spare parts and components for ESPs.
Year Established: 2003