Cable VBShv

1 - Sheath 2 - Armour made of galvanized steel tapes 3 - Separating layer 4 - Insulation 5 - Conductor DESCRIPTION: Power cable with insulated copper conductors with a separating layer made of PVC plastic and armour made of galvanized steel tapes with a protective hose made of PVC plastic. CONDUCTIVE CORE ACCORDING TO GOST 22483 1. Copper, single-wire, round, class 1. Number of cores: 1-5, cross-section of 1.5-16 sq. mm. 2. Copper, multi-wire, round, class 2. Number of cores: 1-5, cross-section of 25-50 sq. mm. 3. Copper, multi-wire, sector-shaped, class 2. Number of cores: 3-5, cross-section of 70-240 sq. mm. INSULATION AND JACKET: VBShv Insulation and sheath made of polyvinyl chloride plastic; VBShvng(A) Insulation made of polyvinyl chloride plastic; Sheath made of low-flammability polyvinyl chloride plastic. VBShvng(A)-LS Insulation and sheath made of low-fire-hazard polyvinyl chloride plastic with reduced smoke and gas emission. VBShvng(A)-HL Insulation made of polyvinyl chloride plastic; Sheath made of low-flammability and high-cold-resistance polyvinyl chloride plastic. VBShvng(A)-LSLTx Insulation and sheath made of low-fire-hazard polyvinyl chloride plasticized polyvinyl chloride, low smoke and gas emission, with low toxicity of combustion products VBShvng(A)-LS-HL Insulation and sheath made of low-fire-hazard polyvinyl chloride plasticized polyvinyl chloride, low smoke and gas emission and increased cold resistance. APPLICATION: The cables are intended for transmission and distribution of electric power in stationary electrical installations at a rated alternating voltage of 0.66 and 1 kV with a rated frequency of 50 Hz. The cables are intended for laying single cable lines in cable structures and premises. When laying such cables in groups, it is mandatory to use fire protection means. Cables with the index "-ng(A)", "-ng(A)-HL" are intended for group laying in cable structures of outdoor (open) electrical installations (cable racks, galleries). Cables with the index "-ng(A)-LS", "-ng(A)-LS-HL" are intended for group laying of cable lines in cable structures and premises of indoor (closed) electrical installations, including at nuclear power facilities. For electrical wiring in residential and public buildings.